Get listed Shortlist
Home > Sectors > Automotive

Automotive Environmental Test Labs

26 companies

1g Dynamics logo

1g Dynamics

Royston, Hertfordshire

New

1g Dynamics in Royston runs a UKAS-accredited test house for vibration and climatic testing alongside its vibration system support work. It carries out sine and random vibration, half-sine, sawtooth and trapezoidal shock, high and low temperature, thermal cycling, damp heat and combined temperature and vibration tests to BS EN 60068, MIL-STD-810 and RTCA DO-160. The test house is accredited to ISO 17025, lab number 6508. Capacity includes shakers of up to 55.6 kN and a 1,700-litre climatic chamber covering -70°C to +180°C. The company works with aerospace, automotive, rail and motorsport customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Combined Climatic and Vibration
3C Test logo

3C Test

Silverstone, Northamptonshire

New

3C Test in Silverstone is an Applus+ Laboratories EMC and environmental test lab serving automotive, EV battery, aerospace and defence, and consumer and industrial electronics customers. Its environmental work covers high and low temperature, thermal shock, thermal cycling, humidity, salt spray, altitude, sine and random vibration, shock, drop and topple, and combined climatic and vibration testing. Standards include BS EN 60068, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is UKAS-accredited to ISO 17025, lab number 1204. A 200 kN shaker can be combined with a large climatic chamber for EV battery pack testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Accelerated Weathering Laboratory (AWL) logo

Accelerated Weathering Laboratory (AWL)

Calne, Wiltshire

New

Accelerated Weathering Laboratory (AWL) in Calne tests coatings, plastics, composites and finished products for corrosion and weathering resistance. Its services include neutral and acidified salt spray, cyclic corrosion, fluorescent UV and xenon arc weathering, and climatic temperature and humidity exposure from -40°C to +180°C, as well as Taber abrasion and number plate testing. Standards include ASTM B117, ISO 9227, ISO 12944, ISO 4892, DEF STAN 00-35 and a range of vehicle manufacturer specifications. The lab is UKAS-accredited to ISO 17025, lab number 7517, and works with the automotive, aerospace, defence and medical sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Salt Spray/Salt Fog
  • Cyclic Corrosion

Aerofin Laboratories

Burnham-on-Sea, Somerset

New

Aerofin Laboratories in Burnham-on-Sea is a coatings and materials test lab offering accelerated environmental testing to the aerospace, defence and automotive markets. Its environmental services cover neutral and acetic acid salt spray, cyclic corrosion, temperature and humidity, UV and xenon weathering, and fluid resistance. Cyclic corrosion chambers range from 450 to 2,600 litres, with more than 12,000 litres of chamber space in total. The lab is UKAS-accredited to ISO 17025, lab number 8408, for salt spray to ASTM B117 and ISO 9227, and also offers metallurgy, microhardness, hydrogen embrittlement and process solution analysis.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Salt Spray/Salt Fog
  • Cyclic Corrosion
Aerotech Laboratories logo

Aerotech Laboratories

Coventry, West Midlands

New

Aerotech Laboratories in Coventry offers neutral salt spray corrosion testing alongside chemical analysis and NDT consumables testing for the aerospace, defence, automotive and metal finishing industries. Salt spray testing runs in three cabinets with 1,500 litres of total capacity, the largest measuring 1,465 x 1,040 x 720 mm, to standards including ASTM B117, ISO 9227 and MIL-STD-810 Method 509. The cabinets run 24 hours a day, all year round, and testing is priced per sample. The lab is UKAS-accredited to ISO 17025, lab number 1993, for neutral salt spray, chemical analysis and fluorescent penetrant testing.

  • Salt Spray/Salt Fog
Alphatech logo

Alphatech

Haverhill, Suffolk

New

Alphatech in Haverhill runs an independent UKAS-accredited environmental test lab alongside its chamber sales, hire and service business. The lab covers high and low temperature, damp heat, thermal shock, sine and random vibration, shock, bump, drop and topple, HALT and HASS, IP dust and water ingress up to IPX9K, neutral salt spray and altitude. Standards include BS EN 60068, IEC 60529, ISO 20653, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is accredited to ISO 17025, lab number 2645, with shakers of up to 40 kN. Customers can stay on site during testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Axis Test Laboratories logo

Axis Test Laboratories

Durham, Durham

New

Axis Test Laboratories in Durham is a UKAS-accredited environmental test lab serving marine, defence, rail, automotive, aerospace, oil and gas, renewable energy and industrial customers. It carries out dry heat, cold, thermal shock, damp heat, cyclic salt spray, sine and random vibration, half-sine shock and package drop testing. Standards include BS EN 60068, MIL-STD-810, BS EN 60945, BS EN 61373, ISO 9227 and ASTM B117. The lab is accredited to ISO 17025, lab number 7670. Its largest climatic chamber measures 2.0 x 3.0 x 2.0 m, and its shakers take static loads of up to 1,000 kg.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Salt Spray/Salt Fog
Element Wednesbury logo

Element Wednesbury

Wednesbury, West Midlands

New

Element Wednesbury, in Wednesbury, West Midlands, tests automotive trim, components and full vehicles, as well as doors, windows and hardware. Environmental work includes low temperature to -40 °C, dry heat to +150 °C, temperature change, cyclic and steady-state damp heat, neutral salt spray corrosion and UV weathering, with drive-in chambers up to 6.0 m x 3.0 m x 2.5 m. Standards include IEC 60068, ASTM B117, ISO 9227 and OEM methods such as Jaguar Land Rover specifications. The site is UKAS-accredited to ISO 17025, lab number 0621, and offers remote witnessing of tests. It serves the automotive and built environment sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Salt Spray/Salt Fog
Environmental Test Services (ETS) logo

Environmental Test Services (ETS)

Reading, Berkshire

New

Environmental Test Services is an independent, owner-managed environmental test laboratory in Reading, Berkshire. It runs vibration, shock, temperature and humidity, altitude and decompression, salt spray and IP testing, including combined temperature and vibration, thermal shock, icing and drop tests. Work is carried out to DEF STAN 00-35, MIL-STD-810, RTCA DO-160 and the IEC 60068 series, with IP testing to IEC 60529. The laboratory is UKAS-accredited to ISO 17025, lab number 1909. Facilities include a walk-in climatic chamber of 1.8 m x 2.4 m x 2.4 m and electromagnetic vibrators of up to 28 kN. Tested product types include aerospace, marine, satellite, telecoms and motor vehicle equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

HORIBA MIRA Basildon

Basildon, Essex

New

HORIBA MIRA Basildon, at Quatro Park in Basildon, Essex, tests components and systems under vibration, climatic cycling, thermal shock, mechanical shock, corrosion and ingress protection. Facilities include 13 environmental chambers from 180 to 2,000 litres, two 36,000-litre walk-in chambers, electromagnetic vibrators and large battery shakers, including an IMV K350 with 900 kN shock thrust. Work is carried out to IEC 60068, MIL-STD-810, DEF STAN 00-35 and RTCA DO-160, including electric vehicle battery packs and modules. The site is UKAS-accredited to ISO 17025, lab number 2654, and serves the automotive, defence and aerospace sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
HORIBA MIRA Nuneaton logo

HORIBA MIRA Nuneaton

Nuneaton, Warwickshire

New

HORIBA MIRA in Nuneaton, Warwickshire, offers environmental testing alongside its vehicle engineering services. Its whole-vehicle static climatic chambers run from -40 to +80 °C with humidity to 98% RH and solar loading, using cyclic profiles such as DEF STAN 00-35 and MIL-STD-810G. Climatic wind tunnels simulate cold, snow, solar loading, humidity and driven rain. Component and battery environmental testing, including climatic cycling, thermal shock, mechanical shock, vibration and dust testing, is carried out at its Basildon site in Essex. HORIBA MIRA holds UKAS testing accreditation to ISO 17025 (Nuneaton lab 1105, Basildon lab 2654). It serves automotive, defence and aerospace customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Intertek Leatherhead

Leatherhead, Surrey

New

Intertek Leatherhead, in Leatherhead, Surrey, runs climatic, vibration, shock and ingress testing alongside EMC, safety and medical testing at one site. Climatic work covers dry heat to +180 C, cold to -75 C, thermal cycling, and cyclic and steady-state damp heat from 10% to 98% rh, to IEC 60068 and MIL-STD-810. Mechanical tests include sine vibration from 2 to 5,000 Hz and half-sine shock up to 5,000 g. Dust and water ingress tests run to IEC 60529, covering IP5X and IP6X dust and IPX1 to IPX8 water. The lab is UKAS-accredited to ISO 17025, lab number 0029, and serves electronics, medical, automotive, building, industrial and energy customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Sine Vibration
JCS Technology logo

JCS Technology

Weston-super-Mare, Somerset

New

JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
MS Testing logo

MS Testing

Newton Aycliffe, Durham

New

MS Testing in Newton Aycliffe, County Durham, is a test laboratory for environmental, EMC and marine type approval work. Its environmental testing covers high and low temperature, damp heat, thermal shock, salt mist, sine and random vibration, half-sine shock, static and dynamic inclination, and dust and water ingress from IP1X to IPX8. Tests are run to IEC 60068, IEC 60529, IEC 60945 and IACS E10. The lab is UKAS-accredited to ISO 17025, lab number 4413, and its largest climatic chamber measures 1.6 m x 1.9 m x 1.6 m. Its main sector is marine equipment, and its salt spray testing also serves automotive components.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
PARC (Product Assessment & Reliability Centre) logo

PARC (Product Assessment & Reliability Centre)

Bideford, Devon

New

PARC (Product Assessment & Reliability Centre) in Bideford, Devon, is an environmental test laboratory and part of the Apave group through Sopemea. It runs high and low temperature, damp heat, thermal shock, altitude, icing, rain, salt spray, IP, vibration, shock, bump and drop tests to IEC 60068, MIL-STD-810, DEF STAN 00-035, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 2379. Capacity includes temperature chambers of up to 2.7 m x 2.7 m x 2.7 m and a vibration system with 89 kN random force. It serves aerospace, defence, automotive, rail, marine, oil and gas and telecoms customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Reltech logo

Reltech

Dursley, Gloucestershire

New

Reltech in Dursley, Gloucestershire, is an independent test laboratory for semiconductor devices and electronic components. It runs high and low temperature operating life and storage tests, temperature and power cycling, temperature-humidity bias (THB) and HAST moisture testing, burn-in screening, ESD and latch-up testing and failure analysis. Work follows JEDEC JESD22 methods and AEC-Q100 qualification requirements. The laboratory is UKAS-accredited to ISO 17025, lab number 2806, and also designs and builds its own HTOL systems. It serves automotive, aerospace and defence, space, medical and telecommunications customers, as well as AI and power device makers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Production Stress Screening
Resonate Testing logo

Resonate Testing

Newry, County Down

New

Resonate Testing in Newry provides vibration, shock, climatic, ingress protection, battery and fire testing from a single facility. Tests include sine and random vibration with combined climatic conditioning, classical and pyroshock, drop, temperature, humidity, thermal shock, altitude to 100,000 ft, IP dust and water, salt spray, sand and dust, rain and fluid susceptibility. Main standards are IEC 60068, MIL-STD-810, RTCA DO-160, DEF STAN 00-35, ISO 16750 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 9373, and is an ISTA Certified Laboratory. Capacity includes a 70 kN shaker. It serves space, aerospace, defence, automotive, energy, medical and industrial customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Automotive is among the industries served by 26 UK environmental test labs on ESS Directory. ISO 16750 and ISO 20653 are the usual standards, and many vehicle manufacturers and Tier 1 suppliers add their own specifications. Services on file include Humidity/Damp Heat (23), Temperature (Hot/Cold) (21), Salt Spray/Salt Fog (16) and Thermal Cycling (15). The most common certifications are ISO 17025 (26), ISO 9001 (4) and Cyber Essentials (4).