Smithers Leatherhead runs a distribution testing laboratory in Leatherhead, Surrey, for pre-shipment testing of packaged products and environmental durability testing of unpackaged products and components. Tests include sine, random and mixed-mode vibration, classical shock, bump, drop, compression, thermal shock, high and low temperature, humidity and reduced-pressure altitude testing. Main standards are ISTA, ASTM D4169, IEC 60068, DEF STAN 00-35 and MIL-STD-810. The laboratory is ISTA Certified and UKAS-accredited to ISO 17025, lab number 0112. Facilities include walk-in climatic chambers and conditioning rooms from -50°C to +70°C. Sectors served include medical, electronics, automotive, aerospace and defence.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Shock
Sine Vibration
3C Test
Silverstone, Northamptonshire
New
3C Test in Silverstone is an Applus+ Laboratories EMC and environmental test lab serving automotive, EV battery, aerospace and defence, and consumer and industrial electronics customers. Its environmental work covers high and low temperature, thermal shock, thermal cycling, humidity, salt spray, altitude, sine and random vibration, shock, drop and topple, and combined climatic and vibration testing. Standards include BS EN 60068, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is UKAS-accredited to ISO 17025, lab number 1204. A 200 kN shaker can be combined with a large climatic chamber for EV battery pack testing.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Thermal Shock
IL
Intertek Leatherhead
Leatherhead, Surrey
New
Intertek Leatherhead, in Leatherhead, Surrey, runs climatic, vibration, shock and ingress testing alongside EMC, safety and medical testing at one site. Climatic work covers dry heat to +180 C, cold to -75 C, thermal cycling, and cyclic and steady-state damp heat from 10% to 98% rh, to IEC 60068 and MIL-STD-810. Mechanical tests include sine vibration from 2 to 5,000 Hz and half-sine shock up to 5,000 g. Dust and water ingress tests run to IEC 60529, covering IP5X and IP6X dust and IPX1 to IPX8 water. The lab is UKAS-accredited to ISO 17025, lab number 0029, and serves electronics, medical, automotive, building, industrial and energy customers.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Sine Vibration
Consumer electronics is among the industries served by 3 UK environmental test labs on ESS Directory. Typical tests are temperature, humidity, drop and vibration, and ingress protection for water-resistant products. Services on file include Temperature (Hot/Cold) (3), Humidity/Damp Heat (3), Sine Vibration (3) and Mechanical Shock (3). The most common certifications are ISO 17025 (3).