Particle Technology in Hatton, Derbyshire, runs sand and dust and ingress protection testing alongside particle and filter analysis services. Its UKAS ISO 17025 scope, lab number 4109, covers turbulent dust and driving sand and dust to DEF STAN 00-035, MIL-STD-810 Method 510 and RTCA DO-160 Section 12, and IP dust and water testing to IEC 60529 and ISO 20653. Facilities include a 12.5 x 4 x 6 m blowing and turbulent dust chamber with a 4 m high access door, and a second 4 x 4 x 3 m dust chamber. It works with defence, aerospace, automotive, medical and telecommunications customers.
Blowing Sand and Dust
IP Dust (IP5X/IP6X)
IP Water (IPX1 to IPX9K)
SGS Buxton
Buxton, Derbyshire
FeaturedNew
SGS Buxton is a product safety laboratory in Buxton, Derbyshire, that incorporates Baseefa and tests equipment for use in potentially explosive atmospheres. It carries out ingress protection testing to IEC 60529 for dust and water, covering IP5X and IP6X dust and IPX1 to IPX8 water, with immersion to 100 metres. Environmental exposure tests include heat endurance at 95°C and 90% RH, dry heat to 250°C and cold endurance to -75°C under IEC 60079-0. The laboratory is UKAS-accredited to ISO 17025, lab number 2593. It serves automotive, industrial, medical device, radio equipment, electricity meter and consumer goods customers.
IP Dust (IP5X/IP6X)
IP Water (IPX1 to IPX9K)
Temperature (Hot/Cold)
Humidity/Damp Heat
Smithers - Leatherhead
Leatherhead, Surrey
FeaturedNew
Smithers Leatherhead runs a distribution testing laboratory in Leatherhead, Surrey, for pre-shipment testing of packaged products and environmental durability testing of unpackaged products and components. Tests include sine, random and mixed-mode vibration, classical shock, bump, drop, compression, thermal shock, high and low temperature, humidity and reduced-pressure altitude testing. Main standards are ISTA, ASTM D4169, IEC 60068, DEF STAN 00-35 and MIL-STD-810. The laboratory is ISTA Certified and UKAS-accredited to ISO 17025, lab number 0112. Facilities include walk-in climatic chambers and conditioning rooms from -50°C to +70°C. Sectors served include medical, electronics, automotive, aerospace and defence.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Shock
Sine Vibration
Accelerated Weathering Laboratory (AWL)
Calne, Wiltshire
New
Accelerated Weathering Laboratory (AWL) in Calne tests coatings, plastics, composites and finished products for corrosion and weathering resistance. Its services include neutral and acidified salt spray, cyclic corrosion, fluorescent UV and xenon arc weathering, and climatic temperature and humidity exposure from -40°C to +180°C, as well as Taber abrasion and number plate testing. Standards include ASTM B117, ISO 9227, ISO 12944, ISO 4892, DEF STAN 00-35 and a range of vehicle manufacturer specifications. The lab is UKAS-accredited to ISO 17025, lab number 7517, and works with the automotive, aerospace, defence and medical sectors.
Temperature (Hot/Cold)
Humidity/Damp Heat
Salt Spray/Salt Fog
Cyclic Corrosion
Alphatech
Haverhill, Suffolk
New
Alphatech in Haverhill runs an independent UKAS-accredited environmental test lab alongside its chamber sales, hire and service business. The lab covers high and low temperature, damp heat, thermal shock, sine and random vibration, shock, bump, drop and topple, HALT and HASS, IP dust and water ingress up to IPX9K, neutral salt spray and altitude. Standards include BS EN 60068, IEC 60529, ISO 20653, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is accredited to ISO 17025, lab number 2645, with shakers of up to 40 kN. Customers can stay on site during testing.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Thermal Shock
Cranage EMC & Safety
Market Drayton, Shropshire
New
Cranage EMC & Safety in Market Drayton, Shropshire, runs environmental tests alongside EMC and product safety work. Its climatic chambers cover temperature, humidity and damp heat, temperature cycling, solar radiation and salt spray. Mechanical tests include random and swept sine vibration from 5 Hz to 2 kHz and shock up to 500 m/s². Ingress protection testing covers dust and water from IP1X to IPX9K, with a 50 m² indoor IPX9K area. Standards include IEC 60068 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 1833, and serves medical, rail and industrial equipment makers.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Solar Radiation
IL
Intertek Leatherhead
Leatherhead, Surrey
New
Intertek Leatherhead, in Leatherhead, Surrey, runs climatic, vibration, shock and ingress testing alongside EMC, safety and medical testing at one site. Climatic work covers dry heat to +180 C, cold to -75 C, thermal cycling, and cyclic and steady-state damp heat from 10% to 98% rh, to IEC 60068 and MIL-STD-810. Mechanical tests include sine vibration from 2 to 5,000 Hz and half-sine shock up to 5,000 g. Dust and water ingress tests run to IEC 60529, covering IP5X and IP6X dust and IPX1 to IPX8 water. The lab is UKAS-accredited to ISO 17025, lab number 0029, and serves electronics, medical, automotive, building, industrial and energy customers.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Sine Vibration
JCS Technology
Weston-super-Mare, Somerset
New
JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Thermal Shock
Medical Engineering Technologies (MET)
Dover, Kent
New
Medical Engineering Technologies (MET) in Dover, Kent, tests medical devices and their packaging, including transit simulation for shipping validation. Its UKAS ISO 17025 scope, lab number 7848, covers distribution testing to ASTM D4169 and ASTM D7386, random vibration of shipping containers, sinusoidal vibration to BS EN 60068-2-6, drop, impact and compression tests, and temperature and humidity conditioning of packages from -30°C to +60°C. Its vibration system takes payloads of up to 300 kg. The lab also carries out accelerated ageing and seal integrity testing for ISO 11607 packaging validation. It works with medical device and pharmaceutical packaging customers.
Transport Simulation
Package Drop and Compression
Sine Vibration
Random Vibration
Reltech
Dursley, Gloucestershire
New
Reltech in Dursley, Gloucestershire, is an independent test laboratory for semiconductor devices and electronic components. It runs high and low temperature operating life and storage tests, temperature and power cycling, temperature-humidity bias (THB) and HAST moisture testing, burn-in screening, ESD and latch-up testing and failure analysis. Work follows JEDEC JESD22 methods and AEC-Q100 qualification requirements. The laboratory is UKAS-accredited to ISO 17025, lab number 2806, and also designs and builds its own HTOL systems. It serves automotive, aerospace and defence, space, medical and telecommunications customers, as well as AI and power device makers.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Production Stress Screening
Resonate Testing
Newry, County Down
New
Resonate Testing in Newry provides vibration, shock, climatic, ingress protection, battery and fire testing from a single facility. Tests include sine and random vibration with combined climatic conditioning, classical and pyroshock, drop, temperature, humidity, thermal shock, altitude to 100,000 ft, IP dust and water, salt spray, sand and dust, rain and fluid susceptibility. Main standards are IEC 60068, MIL-STD-810, RTCA DO-160, DEF STAN 00-35, ISO 16750 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 9373, and is an ISTA Certified Laboratory. Capacity includes a 70 kN shaker. It serves space, aerospace, defence, automotive, energy, medical and industrial customers.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Thermal Shock
TÜV SÜD Fareham
Fareham, Hampshire
New
TÜV SÜD Fareham runs climatic and vibration environmental test facilities at its Hampshire headquarters alongside EMC, radio and electrical safety labs. Its tests cover high and low temperature, damp heat, thermal shock, altitude, rapid decompression, salt corrosion, icing, fluid contamination, water ingress to IPX8, sine and random vibration, shock, drop and transit testing, to standards including IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0141. Capacity includes climatic chambers up to 5.0 m x 6.0 m x 4.0 m and shakers up to 151 kN. Product groups served include aerospace, defence, rail, marine, satellites and medical devices.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Thermal Shock
Medical is among the industries served by 12 UK environmental test labs on ESS Directory. Medical products are commonly tested for temperature, humidity, vibration and ingress protection. Check which standard your regulatory route names. Services on file include Temperature (Hot/Cold) (10), Humidity/Damp Heat (10), Thermal Cycling (7) and Sine Vibration (7). The most common certifications are ISO 17025 (12), ISO 9001 (3) and Cyber Essentials (1).