Get listed Shortlist
Home > All environmental test labs

All environmental test labs

Search 40+ UK environmental test labs by test, standard, accreditation and location, from climatic and vibration testing to IP, salt spray, sand and dust.

45 companies · page 1 of 2

1g Dynamics logo

1g Dynamics

Royston, Hertfordshire

New

1g Dynamics in Royston runs a UKAS-accredited test house for vibration and climatic testing alongside its vibration system support work. It carries out sine and random vibration, half-sine, sawtooth and trapezoidal shock, high and low temperature, thermal cycling, damp heat and combined temperature and vibration tests to BS EN 60068, MIL-STD-810 and RTCA DO-160. The test house is accredited to ISO 17025, lab number 6508. Capacity includes shakers of up to 55.6 kN and a 1,700-litre climatic chamber covering -70°C to +180°C. The company works with aerospace, automotive, rail and motorsport customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Combined Climatic and Vibration
3C Test logo

3C Test

Silverstone, Northamptonshire

New

3C Test in Silverstone is an Applus+ Laboratories EMC and environmental test lab serving automotive, EV battery, aerospace and defence, and consumer and industrial electronics customers. Its environmental work covers high and low temperature, thermal shock, thermal cycling, humidity, salt spray, altitude, sine and random vibration, shock, drop and topple, and combined climatic and vibration testing. Standards include BS EN 60068, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is UKAS-accredited to ISO 17025, lab number 1204. A 200 kN shaker can be combined with a large climatic chamber for EV battery pack testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Accelerated Weathering Laboratory (AWL) logo

Accelerated Weathering Laboratory (AWL)

Calne, Wiltshire

New

Accelerated Weathering Laboratory (AWL) in Calne tests coatings, plastics, composites and finished products for corrosion and weathering resistance. Its services include neutral and acidified salt spray, cyclic corrosion, fluorescent UV and xenon arc weathering, and climatic temperature and humidity exposure from -40°C to +180°C, as well as Taber abrasion and number plate testing. Standards include ASTM B117, ISO 9227, ISO 12944, ISO 4892, DEF STAN 00-35 and a range of vehicle manufacturer specifications. The lab is UKAS-accredited to ISO 17025, lab number 7517, and works with the automotive, aerospace, defence and medical sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Salt Spray/Salt Fog
  • Cyclic Corrosion

Aerofin Laboratories

Burnham-on-Sea, Somerset

New

Aerofin Laboratories in Burnham-on-Sea is a coatings and materials test lab offering accelerated environmental testing to the aerospace, defence and automotive markets. Its environmental services cover neutral and acetic acid salt spray, cyclic corrosion, temperature and humidity, UV and xenon weathering, and fluid resistance. Cyclic corrosion chambers range from 450 to 2,600 litres, with more than 12,000 litres of chamber space in total. The lab is UKAS-accredited to ISO 17025, lab number 8408, for salt spray to ASTM B117 and ISO 9227, and also offers metallurgy, microhardness, hydrogen embrittlement and process solution analysis.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Salt Spray/Salt Fog
  • Cyclic Corrosion
Aerotech Laboratories logo

Aerotech Laboratories

Coventry, West Midlands

New

Aerotech Laboratories in Coventry offers neutral salt spray corrosion testing alongside chemical analysis and NDT consumables testing for the aerospace, defence, automotive and metal finishing industries. Salt spray testing runs in three cabinets with 1,500 litres of total capacity, the largest measuring 1,465 x 1,040 x 720 mm, to standards including ASTM B117, ISO 9227 and MIL-STD-810 Method 509. The cabinets run 24 hours a day, all year round, and testing is priced per sample. The lab is UKAS-accredited to ISO 17025, lab number 1993, for neutral salt spray, chemical analysis and fluorescent penetrant testing.

  • Salt Spray/Salt Fog
Alphatech logo

Alphatech

Haverhill, Suffolk

New

Alphatech in Haverhill runs an independent UKAS-accredited environmental test lab alongside its chamber sales, hire and service business. The lab covers high and low temperature, damp heat, thermal shock, sine and random vibration, shock, bump, drop and topple, HALT and HASS, IP dust and water ingress up to IPX9K, neutral salt spray and altitude. Standards include BS EN 60068, IEC 60529, ISO 20653, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is accredited to ISO 17025, lab number 2645, with shakers of up to 40 kN. Customers can stay on site during testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Axis Test Laboratories logo

Axis Test Laboratories

Durham, Durham

New

Axis Test Laboratories in Durham is a UKAS-accredited environmental test lab serving marine, defence, rail, automotive, aerospace, oil and gas, renewable energy and industrial customers. It carries out dry heat, cold, thermal shock, damp heat, cyclic salt spray, sine and random vibration, half-sine shock and package drop testing. Standards include BS EN 60068, MIL-STD-810, BS EN 60945, BS EN 61373, ISO 9227 and ASTM B117. The lab is accredited to ISO 17025, lab number 7670. Its largest climatic chamber measures 2.0 x 3.0 x 2.0 m, and its shakers take static loads of up to 1,000 kg.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Salt Spray/Salt Fog
BAE Systems Faraday Test Centre logo

BAE Systems Faraday Test Centre

Rochester, Kent

New

BAE Systems Faraday Test Centre in Rochester is a UKAS-accredited environmental and EMC test facility that takes confidential test work from external customers as well as BAE Systems. Environmental capabilities cover temperature, thermal shock, humidity, sine, random and mixed-mode vibration, shock, bump, drop, acceleration, altitude, rapid and explosive decompression, driving rain, immersion, salt fog, icing, fluid contamination and combined temperature, altitude and humidity. Tests run to MIL-STD-810, RTCA DO-160, DEF STAN 00-35 and BS EN 60068. It is accredited to ISO 17025, lab number 0047, with 11 climatic chambers and shakers of up to 118.6 kN.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Cranage EMC & Safety logo

Cranage EMC & Safety

Market Drayton, Shropshire

New

Cranage EMC & Safety in Market Drayton, Shropshire, runs environmental tests alongside EMC and product safety work. Its climatic chambers cover temperature, humidity and damp heat, temperature cycling, solar radiation and salt spray. Mechanical tests include random and swept sine vibration from 5 Hz to 2 kHz and shock up to 500 m/s². Ingress protection testing covers dust and water from IP1X to IPX9K, with a 50 m² indoor IPX9K area. Standards include IEC 60068 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 1833, and serves medical, rail and industrial equipment makers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Solar Radiation
Element Warwick logo

Element Warwick

Warwick, Warwickshire

New

Element Warwick, in Warwick, is an environmental test laboratory running climatic, dynamic and ingress protection tests. Climatic work covers high and low temperature, humidity, thermal shock, altitude to 35 mbar, driving sand and dust, driving rain, icing and salt corrosion. Dynamic work covers sine and random vibration on a shaker with 160 kN peak thrust, vibration at high and low temperature, classical shock, bump, drop and topple, and acceleration. IP testing covers IP5X to IPX8. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, IEC 61373 and IEC 60529. It is UKAS-accredited to ISO 17025, lab number 31737, and serves aerospace, defence, energy and industrial sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration
Element Wednesbury logo

Element Wednesbury

Wednesbury, West Midlands

New

Element Wednesbury, in Wednesbury, West Midlands, tests automotive trim, components and full vehicles, as well as doors, windows and hardware. Environmental work includes low temperature to -40 °C, dry heat to +150 °C, temperature change, cyclic and steady-state damp heat, neutral salt spray corrosion and UV weathering, with drive-in chambers up to 6.0 m x 3.0 m x 2.5 m. Standards include IEC 60068, ASTM B117, ISO 9227 and OEM methods such as Jaguar Land Rover specifications. The site is UKAS-accredited to ISO 17025, lab number 0621, and offers remote witnessing of tests. It serves the automotive and built environment sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Salt Spray/Salt Fog
Environmental Test Services (ETS) logo

Environmental Test Services (ETS)

Reading, Berkshire

New

Environmental Test Services is an independent, owner-managed environmental test laboratory in Reading, Berkshire. It runs vibration, shock, temperature and humidity, altitude and decompression, salt spray and IP testing, including combined temperature and vibration, thermal shock, icing and drop tests. Work is carried out to DEF STAN 00-35, MIL-STD-810, RTCA DO-160 and the IEC 60068 series, with IP testing to IEC 60529. The laboratory is UKAS-accredited to ISO 17025, lab number 1909. Facilities include a walk-in climatic chamber of 1.8 m x 2.4 m x 2.4 m and electromagnetic vibrators of up to 28 kN. Tested product types include aerospace, marine, satellite, telecoms and motor vehicle equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Eurofins E&E CML logo

Eurofins E&E CML

Ellesmere Port, Cheshire

New

Eurofins E&E CML in Ellesmere Port, Cheshire, is a hazardous-area (Ex) certification body and test laboratory, now part of UL Solutions. It offers ingress protection testing to IEC 60529, either within a certification project or as stand-alone testing, covering dust (IP5X and IP6X, enclosures up to about 2.2 m x 1.3 m) and water from IPX3 to IPX9K, with immersion to 100 m. Environmental tests cover temperature from -60°C to 200°C, humidity up to 95°C and 90% RH, and UV exposure to ISO 4892. The laboratory is UKAS-accredited to ISO 17025, lab number 8175, and is an IECEx test laboratory (ExTL).

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • IP Dust (IP5X/IP6X)
  • IP Water (IPX1 to IPX9K)
Eurofins E&E UK London logo

Eurofins E&E UK London

London, Greater London

New

Eurofins E&E UK London Laboratory in London is an electrical safety test laboratory, now part of UL Solutions. Alongside safety testing of household appliances, luminaires, wiring accessories and IT equipment, its UKAS scope includes ingress protection testing to IEC 60529, covering dust (IP5X and IP6X, for objects up to 1800 x 570 x 570 mm) and water from IPX1 to IPX8, with immersion to 1 m. It also holds UKAS scope for IK impact protection testing to IEC 62262. The laboratory is UKAS-accredited to ISO 17025, lab number 0225, for testing at its Western Road site.

  • IP Dust (IP5X/IP6X)
  • IP Water (IPX1 to IPX9K)
Ex Veritas logo

Ex Veritas

Wrexham

New

Ex Veritas is a hazardous-area certification body with test laboratories in Wrexham, Wales. Its laboratory offers ingress protection testing to EN 60529, covering dust-protected (IP5X) and dust-tight (IP6X) categories and water ingress from IPX3 to IPX8, plus NEMA 4 testing for North American approval. Environmental and safety facilities include four humidity and thermal conditioning chambers, thermal cycling and thermal shock testing, and drop tests. The Wrexham laboratory is UKAS-accredited to ISO 17025, lab number 8613, and is an IECEx test laboratory. Testing supports UKCA, ATEX, IECEx and North American approvals.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

HORIBA MIRA Basildon

Basildon, Essex

New

HORIBA MIRA Basildon, at Quatro Park in Basildon, Essex, tests components and systems under vibration, climatic cycling, thermal shock, mechanical shock, corrosion and ingress protection. Facilities include 13 environmental chambers from 180 to 2,000 litres, two 36,000-litre walk-in chambers, electromagnetic vibrators and large battery shakers, including an IMV K350 with 900 kN shock thrust. Work is carried out to IEC 60068, MIL-STD-810, DEF STAN 00-35 and RTCA DO-160, including electric vehicle battery packs and modules. The site is UKAS-accredited to ISO 17025, lab number 2654, and serves the automotive, defence and aerospace sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
HORIBA MIRA Nuneaton logo

HORIBA MIRA Nuneaton

Nuneaton, Warwickshire

New

HORIBA MIRA in Nuneaton, Warwickshire, offers environmental testing alongside its vehicle engineering services. Its whole-vehicle static climatic chambers run from -40 to +80 °C with humidity to 98% RH and solar loading, using cyclic profiles such as DEF STAN 00-35 and MIL-STD-810G. Climatic wind tunnels simulate cold, snow, solar loading, humidity and driven rain. Component and battery environmental testing, including climatic cycling, thermal shock, mechanical shock, vibration and dust testing, is carried out at its Basildon site in Essex. HORIBA MIRA holds UKAS testing accreditation to ISO 17025 (Nuneaton lab 1105, Basildon lab 2654). It serves automotive, defence and aerospace customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Intertek Leatherhead

Leatherhead, Surrey

New

Intertek Leatherhead, in Leatherhead, Surrey, runs climatic, vibration, shock and ingress testing alongside EMC, safety and medical testing at one site. Climatic work covers dry heat to +180 C, cold to -75 C, thermal cycling, and cyclic and steady-state damp heat from 10% to 98% rh, to IEC 60068 and MIL-STD-810. Mechanical tests include sine vibration from 2 to 5,000 Hz and half-sine shock up to 5,000 g. Dust and water ingress tests run to IEC 60529, covering IP5X and IP6X dust and IPX1 to IPX8 water. The lab is UKAS-accredited to ISO 17025, lab number 0029, and serves electronics, medical, automotive, building, industrial and energy customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Sine Vibration
Javer Labs logo

Javer Labs

Nottingham, Nottinghamshire

New

Javer Labs in Nottingham is a laboratory specialising in fungus resistance and mould growth testing. It tests aerospace and defence components and equipment to MIL-STD-810 Method 508, RTCA DO-160 Section 13, BS EN 60068-2-10 and DEF STAN 00-35, with ISO 846 available on request. The laboratory is UKAS-accredited to ISO 17025 for fungus resistance testing, lab number 31736, and is registered on JOSCAR. It is based at Nottingham Science Park and plans to add further environmental tests, starting with susceptibility to fluids.

  • Fungus/Mould Growth
JCS Technology logo

JCS Technology

Weston-super-Mare, Somerset

New

JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Kiwa Electrical Compliance logo

Kiwa Electrical Compliance

Blackwood, Caerphilly

New

Kiwa Electrical Compliance in Blackwood, South Wales, is an EMC, radio and electrical safety test laboratory that also provides ingress protection testing. IP testing follows IEC 60529 and EN 60529, covering probe tests from IP1X to IP4X, dust tests to IP5X and IP6X in a talc powder chamber, and water tests from IPX1 to IPX8 using dripping, spray, jet and immersion fixtures. Pre-compliance reviews and targeted trials are available before formal testing. The laboratory is UKAS-accredited to ISO 17025 for EMC and electrical safety testing, lab number 2667.

  • IP Dust (IP5X/IP6X)
  • IP Water (IPX1 to IPX9K)