Get listed Shortlist
Home > UK > England

Environmental Test Labs in England

39 companies

Intertek Leatherhead

Leatherhead, Surrey

New

Intertek Leatherhead, in Leatherhead, Surrey, runs climatic, vibration, shock and ingress testing alongside EMC, safety and medical testing at one site. Climatic work covers dry heat to +180 C, cold to -75 C, thermal cycling, and cyclic and steady-state damp heat from 10% to 98% rh, to IEC 60068 and MIL-STD-810. Mechanical tests include sine vibration from 2 to 5,000 Hz and half-sine shock up to 5,000 g. Dust and water ingress tests run to IEC 60529, covering IP5X and IP6X dust and IPX1 to IPX8 water. The lab is UKAS-accredited to ISO 17025, lab number 0029, and serves electronics, medical, automotive, building, industrial and energy customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Sine Vibration
Javer Labs logo

Javer Labs

Nottingham, Nottinghamshire

New

Javer Labs in Nottingham is a laboratory specialising in fungus resistance and mould growth testing. It tests aerospace and defence components and equipment to MIL-STD-810 Method 508, RTCA DO-160 Section 13, BS EN 60068-2-10 and DEF STAN 00-35, with ISO 846 available on request. The laboratory is UKAS-accredited to ISO 17025 for fungus resistance testing, lab number 31736, and is registered on JOSCAR. It is based at Nottingham Science Park and plans to add further environmental tests, starting with susceptibility to fluids.

  • Fungus/Mould Growth
JCS Technology logo

JCS Technology

Weston-super-Mare, Somerset

New

JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
LIA Laboratory logo

LIA Laboratory

Telford, Shropshire

New

LIA Laboratory in Telford is an independent, UKAS-accredited test laboratory for lighting and electrical products. Alongside luminaire safety, photometry, flammability and control gear testing, it carries out ingress protection testing to EN 60529, covering dust-protected tests and water tests from IPX3 to IPX8, including submersion to a maximum depth of 100 metres. IP testing of luminaires is also carried out to EN IEC 60598-1, together with IK impact testing. The laboratory is UKAS-accredited to ISO 17025, lab number 1286, and is a UK National Certification Body under the IECEE CB scheme.

  • IP Dust (IP5X/IP6X)
  • IP Water (IPX1 to IPX9K)
Medical Engineering Technologies (MET) logo

Medical Engineering Technologies (MET)

Dover, Kent

New

Medical Engineering Technologies (MET) in Dover, Kent, tests medical devices and their packaging, including transit simulation for shipping validation. Its UKAS ISO 17025 scope, lab number 7848, covers distribution testing to ASTM D4169 and ASTM D7386, random vibration of shipping containers, sinusoidal vibration to BS EN 60068-2-6, drop, impact and compression tests, and temperature and humidity conditioning of packages from -30°C to +60°C. Its vibration system takes payloads of up to 300 kg. The lab also carries out accelerated ageing and seal integrity testing for ISO 11607 packaging validation. It works with medical device and pharmaceutical packaging customers.

  • Transport Simulation
  • Package Drop and Compression
  • Sine Vibration
  • Random Vibration
MS Testing logo

MS Testing

Newton Aycliffe, Durham

New

MS Testing in Newton Aycliffe, County Durham, is a test laboratory for environmental, EMC and marine type approval work. Its environmental testing covers high and low temperature, damp heat, thermal shock, salt mist, sine and random vibration, half-sine shock, static and dynamic inclination, and dust and water ingress from IP1X to IPX8. Tests are run to IEC 60068, IEC 60529, IEC 60945 and IACS E10. The lab is UKAS-accredited to ISO 17025, lab number 4413, and its largest climatic chamber measures 1.6 m x 1.9 m x 1.6 m. Its main sector is marine equipment, and its salt spray testing also serves automotive components.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
PARC (Product Assessment & Reliability Centre) logo

PARC (Product Assessment & Reliability Centre)

Bideford, Devon

New

PARC (Product Assessment & Reliability Centre) in Bideford, Devon, is an environmental test laboratory and part of the Apave group through Sopemea. It runs high and low temperature, damp heat, thermal shock, altitude, icing, rain, salt spray, IP, vibration, shock, bump and drop tests to IEC 60068, MIL-STD-810, DEF STAN 00-035, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 2379. Capacity includes temperature chambers of up to 2.7 m x 2.7 m x 2.7 m and a vibration system with 89 kN random force. It serves aerospace, defence, automotive, rail, marine, oil and gas and telecoms customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
QinetiQ Shoeburyness logo

QinetiQ Shoeburyness

Southend-on-Sea, Essex

New

The QinetiQ Environmental Test Centre at MoD Shoeburyness, Southend-on-Sea, is a UKAS-accredited environmental test facility for ordnance, munitions and explosives, operated by QinetiQ on behalf of the MOD under the LTPA contract. Services include single, twin and multi-axis shaker vibration, free-fall shock, impact and bounce, at temperatures from -60 to +90 °C. Climatic tests cover high and low temperature, steady-state and cyclic humidity, low pressure, rapid decompression, thermal shock, icing, salt mist and fluid contamination. Testing is accredited to ISO 17025 against DEF STAN 00-35, MIL-STD-810 and AECTP (UKAS lab 4294).

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Sine Vibration
Reltech logo

Reltech

Dursley, Gloucestershire

New

Reltech in Dursley, Gloucestershire, is an independent test laboratory for semiconductor devices and electronic components. It runs high and low temperature operating life and storage tests, temperature and power cycling, temperature-humidity bias (THB) and HAST moisture testing, burn-in screening, ESD and latch-up testing and failure analysis. Work follows JEDEC JESD22 methods and AEC-Q100 qualification requirements. The laboratory is UKAS-accredited to ISO 17025, lab number 2806, and also designs and builds its own HTOL systems. It serves automotive, aerospace and defence, space, medical and telecommunications customers, as well as AI and power device makers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Production Stress Screening

Rivencore Global Solutions

Poole, Dorset

New

Rivencore Global Solutions in Poole offers environmental testing from its laboratory on the south coast. Tests include dry heat, low temperature, change of temperature and humidity in a 1,500-litre climatic chamber covering -70°C to +180°C, IP dust and water ingress from IP5X and IPX1 to IPX8, drop testing up to 15 kg, mechanical strength testing and HALT with combined random vibration and temperature stress. Main standards are IEC 60068, IEC 60529, MIL-STD-810, BS EN 60945 and IEC 62368-1. The laboratory is UKAS-accredited to ISO 17025, lab number 28772.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Bump and Drop
Smithers Shawbury logo

Smithers Shawbury

Shrewsbury, Shropshire

New

Smithers Shawbury in Shrewsbury is a materials testing laboratory for plastics, rubber and composites that also carries out environmental exposure tests. Its environmental work covers fluid contamination and susceptibility testing with hydraulic fluids, lubricating oils, solvents, de-icing agents and other fluids to MIL-STD-810, DEF STAN 00-35 and RTCA DO-160, salt spray to ASTM B117 and ISO 9227, ozone cracking resistance and heat resistance. Samples can be materials or complete parts, with functional checks after exposure. The laboratory is UKAS-accredited to ISO 17025, lab number 0067. It also offers chemical analysis, mechanical and physical testing and thermal analysis of polymers.

  • Fluid Contamination
  • Salt Spray/Salt Fog
Space Park Leicester logo

Space Park Leicester

Leicester, Leicestershire

New

Space Park Leicester in Leicester is a space innovation centre that is part of the University of Leicester and offers environmental testing services for hire. Its testing simulates the extreme thermal and vacuum conditions of space to check the performance and reliability of hardware for aerospace, satellite and defence projects. Capabilities cover temperature cycling between high and low temperatures, testing in near-vacuum conditions and customised temperature and vacuum test profiles. Services are open to the space industry, research organisations, SMEs and educational institutions, with each project quoted individually.

  • Thermal Cycling
  • Thermal Vacuum
TÜV SÜD Fareham logo

TÜV SÜD Fareham

Fareham, Hampshire

New

TÜV SÜD Fareham runs climatic and vibration environmental test facilities at its Hampshire headquarters alongside EMC, radio and electrical safety labs. Its tests cover high and low temperature, damp heat, thermal shock, altitude, rapid decompression, salt corrosion, icing, fluid contamination, water ingress to IPX8, sine and random vibration, shock, drop and transit testing, to standards including IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0141. Capacity includes climatic chambers up to 5.0 m x 6.0 m x 4.0 m and shakers up to 151 kN. Product groups served include aerospace, defence, rail, marine, satellites and medical devices.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
UTAC UK - Leyland logo

UTAC UK - Leyland

Preston, Lancashire

New

UTAC UK Leyland, at Aston Way in Leyland, Lancashire, offers component environmental testing alongside vehicle interior and heavy-vehicle dynamic testing. Its accredited scope covers high and low temperature, thermal shock, steady and cyclic humidity, salt spray, sine and random vibration at ambient or with temperature, and classical shock and bump, to IEC 60068, ASTM B117 and ISO 9227. The lab is UKAS-accredited to ISO 17025, lab number 10121. Capacity includes climatic chambers up to 3 m x 4 m x 6 m, a 40 kN electrodynamic shaker and hydraulic vibration rigs up to 250 kN. Product groups include motor vehicles, aerospace, rail, marine and telecommunications equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration
ZF Automotive UK Test & Validation logo

ZF Automotive UK Test & Validation

Solihull, West Midlands

New

ZF Automotive UK Test & Validation in Solihull offers EMC, environmental and materials testing for automotive and other industry components. Its environmental scope covers dry heat, low temperature, humidity, thermal cycling and thermal shock, salt mist, IP dust and water to IPX9K, icing, fluid contamination, low pressure, and sine, random, shock, bump and drop testing, with combined temperature and vibration. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0332. Capacity includes 2,500-litre climatic chambers and a 66 kN shaker. It serves automotive, aerospace and rail.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock