3 Nov 2026 — Scheduled verification (Max). Added fungus and mould growth testing to MIL-STD-810, RTCA DO-160, IEC 60068 and DEF STAN 00-35, ISO 17025 accreditation, JOSCAR registration and the aerospace and defence sector.
3 Nov 2026 — Listing added to ESS Directory, pending verification checks.
Javer Labs in Nottingham is a laboratory specialising in fungus resistance and mould growth testing. It tests aerospace and defence components and equipment to MIL-STD-810 Method 508, RTCA DO-160 Section 13, BS EN 60068-2-10 and DEF STAN 00-35, with ISO 846 available on request. The laboratory is UKAS-accredited to ISO 17025 for fungus resistance testing, lab number 31736, and is registered on JOSCAR. It is based at Nottingham Science Park and plans to add further environmental tests, starting with susceptibility to fluids.
Unit 8, Heathcoat Building, Nottingham Science Park, Nottingham · More in England
Similar companies
JCS Technology
Weston-super-Mare, Somerset
New
JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Thermal Shock
Particle Technology
Hatton, Derbyshire
FeaturedNew
Particle Technology in Hatton, Derbyshire, runs sand and dust and ingress protection testing alongside particle and filter analysis services. Its UKAS ISO 17025 scope, lab number 4109, covers turbulent dust and driving sand and dust to DEF STAN 00-035, MIL-STD-810 Method 510 and RTCA DO-160 Section 12, and IP dust and water testing to IEC 60529 and ISO 20653. Facilities include a 12.5 x 4 x 6 m blowing and turbulent dust chamber with a 4 m high access door, and a second 4 x 4 x 3 m dust chamber. It works with defence, aerospace, automotive, medical and telecommunications customers.
Blowing Sand and Dust
IP Dust (IP5X/IP6X)
IP Water (IPX1 to IPX9K)
HORIBA MIRA Nuneaton
Nuneaton, Warwickshire
New
HORIBA MIRA in Nuneaton, Warwickshire, offers environmental testing alongside its vehicle engineering services. Its whole-vehicle static climatic chambers run from -40 to +80 °C with humidity to 98% RH and solar loading, using cyclic profiles such as DEF STAN 00-35 and MIL-STD-810G. Climatic wind tunnels simulate cold, snow, solar loading, humidity and driven rain. Component and battery environmental testing, including climatic cycling, thermal shock, mechanical shock, vibration and dust testing, is carried out at its Basildon site in Essex. HORIBA MIRA holds UKAS testing accreditation to ISO 17025 (Nuneaton lab 1105, Basildon lab 2654). It serves automotive, defence and aerospace customers.