Get listed Shortlist
Home > ESS Tests > Rain, Ice & Fluid Testing

Rain, Ice & Fluid Testing Companies in the UK

13 companies

BAE Systems Faraday Test Centre logo

BAE Systems Faraday Test Centre

Rochester, Kent

New

BAE Systems Faraday Test Centre in Rochester is a UKAS-accredited environmental and EMC test facility that takes confidential test work from external customers as well as BAE Systems. Environmental capabilities cover temperature, thermal shock, humidity, sine, random and mixed-mode vibration, shock, bump, drop, acceleration, altitude, rapid and explosive decompression, driving rain, immersion, salt fog, icing, fluid contamination and combined temperature, altitude and humidity. Tests run to MIL-STD-810, RTCA DO-160, DEF STAN 00-35 and BS EN 60068. It is accredited to ISO 17025, lab number 0047, with 11 climatic chambers and shakers of up to 118.6 kN.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Element Warwick logo

Element Warwick

Warwick, Warwickshire

New

Element Warwick, in Warwick, is an environmental test laboratory running climatic, dynamic and ingress protection tests. Climatic work covers high and low temperature, humidity, thermal shock, altitude to 35 mbar, driving sand and dust, driving rain, icing and salt corrosion. Dynamic work covers sine and random vibration on a shaker with 160 kN peak thrust, vibration at high and low temperature, classical shock, bump, drop and topple, and acceleration. IP testing covers IP5X to IPX8. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, IEC 61373 and IEC 60529. It is UKAS-accredited to ISO 17025, lab number 31737, and serves aerospace, defence, energy and industrial sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration
Environmental Test Services (ETS) logo

Environmental Test Services (ETS)

Reading, Berkshire

New

Environmental Test Services is an independent, owner-managed environmental test laboratory in Reading, Berkshire. It runs vibration, shock, temperature and humidity, altitude and decompression, salt spray and IP testing, including combined temperature and vibration, thermal shock, icing and drop tests. Work is carried out to DEF STAN 00-35, MIL-STD-810, RTCA DO-160 and the IEC 60068 series, with IP testing to IEC 60529. The laboratory is UKAS-accredited to ISO 17025, lab number 1909. Facilities include a walk-in climatic chamber of 1.8 m x 2.4 m x 2.4 m and electromagnetic vibrators of up to 28 kN. Tested product types include aerospace, marine, satellite, telecoms and motor vehicle equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
HORIBA MIRA Nuneaton logo

HORIBA MIRA Nuneaton

Nuneaton, Warwickshire

New

HORIBA MIRA in Nuneaton, Warwickshire, offers environmental testing alongside its vehicle engineering services. Its whole-vehicle static climatic chambers run from -40 to +80 °C with humidity to 98% RH and solar loading, using cyclic profiles such as DEF STAN 00-35 and MIL-STD-810G. Climatic wind tunnels simulate cold, snow, solar loading, humidity and driven rain. Component and battery environmental testing, including climatic cycling, thermal shock, mechanical shock, vibration and dust testing, is carried out at its Basildon site in Essex. HORIBA MIRA holds UKAS testing accreditation to ISO 17025 (Nuneaton lab 1105, Basildon lab 2654). It serves automotive, defence and aerospace customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Javer Labs logo

Javer Labs

Nottingham, Nottinghamshire

New

Javer Labs in Nottingham is a laboratory specialising in fungus resistance and mould growth testing. It tests aerospace and defence components and equipment to MIL-STD-810 Method 508, RTCA DO-160 Section 13, BS EN 60068-2-10 and DEF STAN 00-35, with ISO 846 available on request. The laboratory is UKAS-accredited to ISO 17025 for fungus resistance testing, lab number 31736, and is registered on JOSCAR. It is based at Nottingham Science Park and plans to add further environmental tests, starting with susceptibility to fluids.

  • Fungus/Mould Growth
JCS Technology logo

JCS Technology

Weston-super-Mare, Somerset

New

JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Leonardo Environmental Test Lab (Edinburgh) logo

Leonardo Environmental Test Lab (Edinburgh)

Edinburgh

New

Leonardo Environmental Test Lab in Edinburgh carries out climatic, dynamic and EMC testing at Leonardo UK's Crewe Toll site. Climatic tests cover high and low temperature from -60°C to +180°C, damp heat, thermal shock, altitude to 100,000 ft, rapid decompression, solar radiation, salt mist, immersion, drip and fluid contamination. Dynamic tests include sine and random vibration on shakers up to 13,000 lbf, combined temperature and vibration, shock, bump and drop. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0461, with climatic chambers up to 4 m x 1.5 m x 1.8 m.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
PARC (Product Assessment & Reliability Centre) logo

PARC (Product Assessment & Reliability Centre)

Bideford, Devon

New

PARC (Product Assessment & Reliability Centre) in Bideford, Devon, is an environmental test laboratory and part of the Apave group through Sopemea. It runs high and low temperature, damp heat, thermal shock, altitude, icing, rain, salt spray, IP, vibration, shock, bump and drop tests to IEC 60068, MIL-STD-810, DEF STAN 00-035, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 2379. Capacity includes temperature chambers of up to 2.7 m x 2.7 m x 2.7 m and a vibration system with 89 kN random force. It serves aerospace, defence, automotive, rail, marine, oil and gas and telecoms customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
QinetiQ Shoeburyness logo

QinetiQ Shoeburyness

Southend-on-Sea, Essex

New

The QinetiQ Environmental Test Centre at MoD Shoeburyness, Southend-on-Sea, is a UKAS-accredited environmental test facility for ordnance, munitions and explosives, operated by QinetiQ on behalf of the MOD under the LTPA contract. Services include single, twin and multi-axis shaker vibration, free-fall shock, impact and bounce, at temperatures from -60 to +90 °C. Climatic tests cover high and low temperature, steady-state and cyclic humidity, low pressure, rapid decompression, thermal shock, icing, salt mist and fluid contamination. Testing is accredited to ISO 17025 against DEF STAN 00-35, MIL-STD-810 and AECTP (UKAS lab 4294).

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Sine Vibration
Resonate Testing logo

Resonate Testing

Newry, County Down

New

Resonate Testing in Newry provides vibration, shock, climatic, ingress protection, battery and fire testing from a single facility. Tests include sine and random vibration with combined climatic conditioning, classical and pyroshock, drop, temperature, humidity, thermal shock, altitude to 100,000 ft, IP dust and water, salt spray, sand and dust, rain and fluid susceptibility. Main standards are IEC 60068, MIL-STD-810, RTCA DO-160, DEF STAN 00-35, ISO 16750 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 9373, and is an ISTA Certified Laboratory. Capacity includes a 70 kN shaker. It serves space, aerospace, defence, automotive, energy, medical and industrial customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Smithers Shawbury logo

Smithers Shawbury

Shrewsbury, Shropshire

New

Smithers Shawbury in Shrewsbury is a materials testing laboratory for plastics, rubber and composites that also carries out environmental exposure tests. Its environmental work covers fluid contamination and susceptibility testing with hydraulic fluids, lubricating oils, solvents, de-icing agents and other fluids to MIL-STD-810, DEF STAN 00-35 and RTCA DO-160, salt spray to ASTM B117 and ISO 9227, ozone cracking resistance and heat resistance. Samples can be materials or complete parts, with functional checks after exposure. The laboratory is UKAS-accredited to ISO 17025, lab number 0067. It also offers chemical analysis, mechanical and physical testing and thermal analysis of polymers.

  • Fluid Contamination
  • Salt Spray/Salt Fog
TÜV SÜD Fareham logo

TÜV SÜD Fareham

Fareham, Hampshire

New

TÜV SÜD Fareham runs climatic and vibration environmental test facilities at its Hampshire headquarters alongside EMC, radio and electrical safety labs. Its tests cover high and low temperature, damp heat, thermal shock, altitude, rapid decompression, salt corrosion, icing, fluid contamination, water ingress to IPX8, sine and random vibration, shock, drop and transit testing, to standards including IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0141. Capacity includes climatic chambers up to 5.0 m x 6.0 m x 4.0 m and shakers up to 151 kN. Product groups served include aerospace, defence, rail, marine, satellites and medical devices.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
ZF Automotive UK Test & Validation logo

ZF Automotive UK Test & Validation

Solihull, West Midlands

New

ZF Automotive UK Test & Validation in Solihull offers EMC, environmental and materials testing for automotive and other industry components. Its environmental scope covers dry heat, low temperature, humidity, thermal cycling and thermal shock, salt mist, IP dust and water to IPX9K, icing, fluid contamination, low pressure, and sine, random, shock, bump and drop testing, with combined temperature and vibration. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0332. Capacity includes 2,500-litre climatic chambers and a 66 kN shaker. It serves automotive, aerospace and rail.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Rain, ice and fluid testing labs in the UK test how products cope with water, ice, fluids and biological growth. Driving rain tests spray water at an angle to represent wind-driven rain. Icing and freezing rain tests build up ice on a product. Fluid contamination tests expose it to fuels, oils, cleaning fluids and other liquids, and fungus tests check whether materials support mould growth in warm, humid conditions.

Start with the standard. MIL-STD-810, DEF STAN 00-35 and RTCA DO-160 include these tests for defence and aerospace equipment, and the specification sets the fluids, temperatures, durations and pass criteria. Ask which fluids and conditions apply and whether the product operates during exposure. Check the test area against the size of the product and how the lab handles and disposes of the fluids.

13 of the 45 UK labs listed here offer driving rain, icing, fluid contamination or fungus testing. Filter by test and standard, and use our guide to choosing between DEF STAN 00-35, MIL-STD-810 and DO-160 if your contract names a defence or aerospace standard.

Related categories: IP & Ingress Testing, Climatic, Temperature & Humidity Testing and Sand, Dust & Mud Testing.

Questions buyers ask

How is driving rain testing different from an IP water test?

An IP water test under IEC 60529 checks ingress with drips, sprays or jets at defined angles and rates. Driving rain tests in defence and aerospace standards represent wind-driven rain on equipment in the open. They are separate tests with their own conditions and pass criteria.

What is fluid contamination testing?

Exposing a product to fluids it may meet in service, such as fuels, oils, hydraulic fluid, de-icing fluid and cleaning agents, to check for damage or malfunction. The specification states which fluids, how they are applied and for how long.

What is fungus testing?

Exposing materials to fungal spores in warm, humid conditions for a set period, to see whether they support growth that could damage the product. It is part of several defence and aerospace test programmes.

Can the lab test with my own fluids?

Usually, but ask early. The lab may need safety data sheets and may have limits on what it can handle and dispose of. Say which fluids you need in the enquiry.