LIA Laboratory in Telford is an independent, UKAS-accredited test laboratory for lighting and electrical products. Alongside luminaire safety, photometry, flammability and control gear testing, it carries out ingress protection testing to EN 60529, covering dust-protected tests and water tests from IPX3 to IPX8, including submersion to a maximum depth of 100 metres. IP testing of luminaires is also carried out to EN IEC 60598-1, together with IK impact testing. The laboratory is UKAS-accredited to ISO 17025, lab number 1286, and is a UK National Certification Body under the IECEE CB scheme.
Cranage EMC & Safety in Market Drayton, Shropshire, runs environmental tests alongside EMC and product safety work. Its climatic chambers cover temperature, humidity and damp heat, temperature cycling, solar radiation and salt spray. Mechanical tests include random and swept sine vibration from 5 Hz to 2 kHz and shock up to 500 m/s². Ingress protection testing covers dust and water from IP1X to IPX9K, with a 50 m² indoor IPX9K area. Standards include IEC 60068 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 1833, and serves medical, rail and industrial equipment makers.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Solar Radiation
Ex Veritas
Wrexham
New
Ex Veritas is a hazardous-area certification body with test laboratories in Wrexham, Wales. Its laboratory offers ingress protection testing to EN 60529, covering dust-protected (IP5X) and dust-tight (IP6X) categories and water ingress from IPX3 to IPX8, plus NEMA 4 testing for North American approval. Environmental and safety facilities include four humidity and thermal conditioning chambers, thermal cycling and thermal shock testing, and drop tests. The Wrexham laboratory is UKAS-accredited to ISO 17025, lab number 8613, and is an IECEx test laboratory. Testing supports UKCA, ATEX, IECEx and North American approvals.
Temperature (Hot/Cold)
Humidity/Damp Heat
Thermal Cycling
Thermal Shock
Particle Technology
Hatton, Derbyshire
FeaturedNew
Particle Technology in Hatton, Derbyshire, runs sand and dust and ingress protection testing alongside particle and filter analysis services. Its UKAS ISO 17025 scope, lab number 4109, covers turbulent dust and driving sand and dust to DEF STAN 00-035, MIL-STD-810 Method 510 and RTCA DO-160 Section 12, and IP dust and water testing to IEC 60529 and ISO 20653. Facilities include a 12.5 x 4 x 6 m blowing and turbulent dust chamber with a 4 m high access door, and a second 4 x 4 x 3 m dust chamber. It works with defence, aerospace, automotive, medical and telecommunications customers.