Get listed Shortlist
Home > ESS Tests > Corrosion & Salt Spray Testing

Corrosion & Salt Spray Testing Companies in the UK

25 companies

3C Test logo

3C Test

Silverstone, Northamptonshire

New

3C Test in Silverstone is an Applus+ Laboratories EMC and environmental test lab serving automotive, EV battery, aerospace and defence, and consumer and industrial electronics customers. Its environmental work covers high and low temperature, thermal shock, thermal cycling, humidity, salt spray, altitude, sine and random vibration, shock, drop and topple, and combined climatic and vibration testing. Standards include BS EN 60068, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is UKAS-accredited to ISO 17025, lab number 1204. A 200 kN shaker can be combined with a large climatic chamber for EV battery pack testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Accelerated Weathering Laboratory (AWL) logo

Accelerated Weathering Laboratory (AWL)

Calne, Wiltshire

New

Accelerated Weathering Laboratory (AWL) in Calne tests coatings, plastics, composites and finished products for corrosion and weathering resistance. Its services include neutral and acidified salt spray, cyclic corrosion, fluorescent UV and xenon arc weathering, and climatic temperature and humidity exposure from -40°C to +180°C, as well as Taber abrasion and number plate testing. Standards include ASTM B117, ISO 9227, ISO 12944, ISO 4892, DEF STAN 00-35 and a range of vehicle manufacturer specifications. The lab is UKAS-accredited to ISO 17025, lab number 7517, and works with the automotive, aerospace, defence and medical sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Salt Spray/Salt Fog
  • Cyclic Corrosion

Aerofin Laboratories

Burnham-on-Sea, Somerset

New

Aerofin Laboratories in Burnham-on-Sea is a coatings and materials test lab offering accelerated environmental testing to the aerospace, defence and automotive markets. Its environmental services cover neutral and acetic acid salt spray, cyclic corrosion, temperature and humidity, UV and xenon weathering, and fluid resistance. Cyclic corrosion chambers range from 450 to 2,600 litres, with more than 12,000 litres of chamber space in total. The lab is UKAS-accredited to ISO 17025, lab number 8408, for salt spray to ASTM B117 and ISO 9227, and also offers metallurgy, microhardness, hydrogen embrittlement and process solution analysis.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Salt Spray/Salt Fog
  • Cyclic Corrosion
Aerotech Laboratories logo

Aerotech Laboratories

Coventry, West Midlands

New

Aerotech Laboratories in Coventry offers neutral salt spray corrosion testing alongside chemical analysis and NDT consumables testing for the aerospace, defence, automotive and metal finishing industries. Salt spray testing runs in three cabinets with 1,500 litres of total capacity, the largest measuring 1,465 x 1,040 x 720 mm, to standards including ASTM B117, ISO 9227 and MIL-STD-810 Method 509. The cabinets run 24 hours a day, all year round, and testing is priced per sample. The lab is UKAS-accredited to ISO 17025, lab number 1993, for neutral salt spray, chemical analysis and fluorescent penetrant testing.

  • Salt Spray/Salt Fog
Alphatech logo

Alphatech

Haverhill, Suffolk

New

Alphatech in Haverhill runs an independent UKAS-accredited environmental test lab alongside its chamber sales, hire and service business. The lab covers high and low temperature, damp heat, thermal shock, sine and random vibration, shock, bump, drop and topple, HALT and HASS, IP dust and water ingress up to IPX9K, neutral salt spray and altitude. Standards include BS EN 60068, IEC 60529, ISO 20653, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is accredited to ISO 17025, lab number 2645, with shakers of up to 40 kN. Customers can stay on site during testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Axis Test Laboratories logo

Axis Test Laboratories

Durham, Durham

New

Axis Test Laboratories in Durham is a UKAS-accredited environmental test lab serving marine, defence, rail, automotive, aerospace, oil and gas, renewable energy and industrial customers. It carries out dry heat, cold, thermal shock, damp heat, cyclic salt spray, sine and random vibration, half-sine shock and package drop testing. Standards include BS EN 60068, MIL-STD-810, BS EN 60945, BS EN 61373, ISO 9227 and ASTM B117. The lab is accredited to ISO 17025, lab number 7670. Its largest climatic chamber measures 2.0 x 3.0 x 2.0 m, and its shakers take static loads of up to 1,000 kg.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Salt Spray/Salt Fog
BAE Systems Faraday Test Centre logo

BAE Systems Faraday Test Centre

Rochester, Kent

New

BAE Systems Faraday Test Centre in Rochester is a UKAS-accredited environmental and EMC test facility that takes confidential test work from external customers as well as BAE Systems. Environmental capabilities cover temperature, thermal shock, humidity, sine, random and mixed-mode vibration, shock, bump, drop, acceleration, altitude, rapid and explosive decompression, driving rain, immersion, salt fog, icing, fluid contamination and combined temperature, altitude and humidity. Tests run to MIL-STD-810, RTCA DO-160, DEF STAN 00-35 and BS EN 60068. It is accredited to ISO 17025, lab number 0047, with 11 climatic chambers and shakers of up to 118.6 kN.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Cranage EMC & Safety logo

Cranage EMC & Safety

Market Drayton, Shropshire

New

Cranage EMC & Safety in Market Drayton, Shropshire, runs environmental tests alongside EMC and product safety work. Its climatic chambers cover temperature, humidity and damp heat, temperature cycling, solar radiation and salt spray. Mechanical tests include random and swept sine vibration from 5 Hz to 2 kHz and shock up to 500 m/s². Ingress protection testing covers dust and water from IP1X to IPX9K, with a 50 m² indoor IPX9K area. Standards include IEC 60068 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 1833, and serves medical, rail and industrial equipment makers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Solar Radiation
Element Warwick logo

Element Warwick

Warwick, Warwickshire

New

Element Warwick, in Warwick, is an environmental test laboratory running climatic, dynamic and ingress protection tests. Climatic work covers high and low temperature, humidity, thermal shock, altitude to 35 mbar, driving sand and dust, driving rain, icing and salt corrosion. Dynamic work covers sine and random vibration on a shaker with 160 kN peak thrust, vibration at high and low temperature, classical shock, bump, drop and topple, and acceleration. IP testing covers IP5X to IPX8. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, IEC 61373 and IEC 60529. It is UKAS-accredited to ISO 17025, lab number 31737, and serves aerospace, defence, energy and industrial sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration
Element Wednesbury logo

Element Wednesbury

Wednesbury, West Midlands

New

Element Wednesbury, in Wednesbury, West Midlands, tests automotive trim, components and full vehicles, as well as doors, windows and hardware. Environmental work includes low temperature to -40 °C, dry heat to +150 °C, temperature change, cyclic and steady-state damp heat, neutral salt spray corrosion and UV weathering, with drive-in chambers up to 6.0 m x 3.0 m x 2.5 m. Standards include IEC 60068, ASTM B117, ISO 9227 and OEM methods such as Jaguar Land Rover specifications. The site is UKAS-accredited to ISO 17025, lab number 0621, and offers remote witnessing of tests. It serves the automotive and built environment sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Salt Spray/Salt Fog
Environmental Test Services (ETS) logo

Environmental Test Services (ETS)

Reading, Berkshire

New

Environmental Test Services is an independent, owner-managed environmental test laboratory in Reading, Berkshire. It runs vibration, shock, temperature and humidity, altitude and decompression, salt spray and IP testing, including combined temperature and vibration, thermal shock, icing and drop tests. Work is carried out to DEF STAN 00-35, MIL-STD-810, RTCA DO-160 and the IEC 60068 series, with IP testing to IEC 60529. The laboratory is UKAS-accredited to ISO 17025, lab number 1909. Facilities include a walk-in climatic chamber of 1.8 m x 2.4 m x 2.4 m and electromagnetic vibrators of up to 28 kN. Tested product types include aerospace, marine, satellite, telecoms and motor vehicle equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
JCS Technology logo

JCS Technology

Weston-super-Mare, Somerset

New

JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Leonardo Environmental Test Lab (Edinburgh) logo

Leonardo Environmental Test Lab (Edinburgh)

Edinburgh

New

Leonardo Environmental Test Lab in Edinburgh carries out climatic, dynamic and EMC testing at Leonardo UK's Crewe Toll site. Climatic tests cover high and low temperature from -60°C to +180°C, damp heat, thermal shock, altitude to 100,000 ft, rapid decompression, solar radiation, salt mist, immersion, drip and fluid contamination. Dynamic tests include sine and random vibration on shakers up to 13,000 lbf, combined temperature and vibration, shock, bump and drop. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0461, with climatic chambers up to 4 m x 1.5 m x 1.8 m.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
MS Testing logo

MS Testing

Newton Aycliffe, Durham

New

MS Testing in Newton Aycliffe, County Durham, is a test laboratory for environmental, EMC and marine type approval work. Its environmental testing covers high and low temperature, damp heat, thermal shock, salt mist, sine and random vibration, half-sine shock, static and dynamic inclination, and dust and water ingress from IP1X to IPX8. Tests are run to IEC 60068, IEC 60529, IEC 60945 and IACS E10. The lab is UKAS-accredited to ISO 17025, lab number 4413, and its largest climatic chamber measures 1.6 m x 1.9 m x 1.6 m. Its main sector is marine equipment, and its salt spray testing also serves automotive components.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
PARC (Product Assessment & Reliability Centre) logo

PARC (Product Assessment & Reliability Centre)

Bideford, Devon

New

PARC (Product Assessment & Reliability Centre) in Bideford, Devon, is an environmental test laboratory and part of the Apave group through Sopemea. It runs high and low temperature, damp heat, thermal shock, altitude, icing, rain, salt spray, IP, vibration, shock, bump and drop tests to IEC 60068, MIL-STD-810, DEF STAN 00-035, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 2379. Capacity includes temperature chambers of up to 2.7 m x 2.7 m x 2.7 m and a vibration system with 89 kN random force. It serves aerospace, defence, automotive, rail, marine, oil and gas and telecoms customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
QinetiQ Shoeburyness logo

QinetiQ Shoeburyness

Southend-on-Sea, Essex

New

The QinetiQ Environmental Test Centre at MoD Shoeburyness, Southend-on-Sea, is a UKAS-accredited environmental test facility for ordnance, munitions and explosives, operated by QinetiQ on behalf of the MOD under the LTPA contract. Services include single, twin and multi-axis shaker vibration, free-fall shock, impact and bounce, at temperatures from -60 to +90 °C. Climatic tests cover high and low temperature, steady-state and cyclic humidity, low pressure, rapid decompression, thermal shock, icing, salt mist and fluid contamination. Testing is accredited to ISO 17025 against DEF STAN 00-35, MIL-STD-810 and AECTP (UKAS lab 4294).

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Sine Vibration
Resonate Testing logo

Resonate Testing

Newry, County Down

New

Resonate Testing in Newry provides vibration, shock, climatic, ingress protection, battery and fire testing from a single facility. Tests include sine and random vibration with combined climatic conditioning, classical and pyroshock, drop, temperature, humidity, thermal shock, altitude to 100,000 ft, IP dust and water, salt spray, sand and dust, rain and fluid susceptibility. Main standards are IEC 60068, MIL-STD-810, RTCA DO-160, DEF STAN 00-35, ISO 16750 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 9373, and is an ISTA Certified Laboratory. Capacity includes a 70 kN shaker. It serves space, aerospace, defence, automotive, energy, medical and industrial customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Rhymney Test Equipment (Testing House) logo

Rhymney Test Equipment (Testing House)

Rhymney, Caerphilly

New

Rhymney Test Equipment (Testing House) in Rhymney runs an environmental testing laboratory for climatic and corrosion work. Tests include dry heat to +180°C, cold to -70°C, temperature cycling, thermal shock, humidity, salt spray and transport simulation, for design and development, standards compliance, accelerated life testing and production monitoring. Main standards are IEC 60068, DEF STAN 00-35, MIL-STD-810, ASTM B117 and ISO 9227. The lab is UKAS-accredited to ISO 17025, lab number 22985, and holds ISO 9001. Its largest climatic chamber measures 1.5 m x 2.4 m x 1.5 m. The company also offers chamber calibration, chamber hire and chamber sales.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Smithers Shawbury logo

Smithers Shawbury

Shrewsbury, Shropshire

New

Smithers Shawbury in Shrewsbury is a materials testing laboratory for plastics, rubber and composites that also carries out environmental exposure tests. Its environmental work covers fluid contamination and susceptibility testing with hydraulic fluids, lubricating oils, solvents, de-icing agents and other fluids to MIL-STD-810, DEF STAN 00-35 and RTCA DO-160, salt spray to ASTM B117 and ISO 9227, ozone cracking resistance and heat resistance. Samples can be materials or complete parts, with functional checks after exposure. The laboratory is UKAS-accredited to ISO 17025, lab number 0067. It also offers chemical analysis, mechanical and physical testing and thermal analysis of polymers.

  • Fluid Contamination
  • Salt Spray/Salt Fog
TÜV SÜD Fareham logo

TÜV SÜD Fareham

Fareham, Hampshire

New

TÜV SÜD Fareham runs climatic and vibration environmental test facilities at its Hampshire headquarters alongside EMC, radio and electrical safety labs. Its tests cover high and low temperature, damp heat, thermal shock, altitude, rapid decompression, salt corrosion, icing, fluid contamination, water ingress to IPX8, sine and random vibration, shock, drop and transit testing, to standards including IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0141. Capacity includes climatic chambers up to 5.0 m x 6.0 m x 4.0 m and shakers up to 151 kN. Product groups served include aerospace, defence, rail, marine, satellites and medical devices.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
UTAC UK - Leyland logo

UTAC UK - Leyland

Preston, Lancashire

New

UTAC UK Leyland, at Aston Way in Leyland, Lancashire, offers component environmental testing alongside vehicle interior and heavy-vehicle dynamic testing. Its accredited scope covers high and low temperature, thermal shock, steady and cyclic humidity, salt spray, sine and random vibration at ambient or with temperature, and classical shock and bump, to IEC 60068, ASTM B117 and ISO 9227. The lab is UKAS-accredited to ISO 17025, lab number 10121. Capacity includes climatic chambers up to 3 m x 4 m x 6 m, a 40 kN electrodynamic shaker and hydraulic vibration rigs up to 250 kN. Product groups include motor vehicles, aerospace, rail, marine and telecommunications equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration

Salt spray and corrosion testing labs in the UK expose coatings, parts and assemblies to corrosive conditions to show how well they resist rust and degradation. Neutral salt spray, also called salt fog, holds samples in a fine salt mist. Cyclic corrosion tests alternate salt spray, drying and humidity, which is usually a closer match to real conditions. Mixed flowing gas tests expose electronic contacts to low levels of corrosive gases.

Start with the standard. ISO 9227 and ASTM B117 cover salt spray, and your specification sets the duration, the number of samples and the pass criteria for the corrosion you will accept. Salt spray results compare coatings under identical conditions, but they do not predict a service life, so be clear about what the test is for. Check the chamber size against your parts and whether the lab can inspect and report at set intervals.

25 of the 45 UK labs listed here offer salt spray, cyclic corrosion or mixed flowing gas testing. Filter by test and standard, and check the lab's UKAS scope if you need an accredited report. Use our guide to choosing a UK environmental test lab for the questions to ask.

Related categories: IP & Ingress Testing, Solar, UV & Weathering Testing and Climatic, Temperature & Humidity Testing.

Questions buyers ask

What is the difference between salt spray and cyclic corrosion testing?

Salt spray holds samples in a constant salt mist. Cyclic corrosion alternates salt spray, drying and humidity, which better represents outdoor and automotive conditions, and often produces results closer to field experience. The specification states which one is required.

Which standards apply to salt spray testing?

ISO 9227 and ASTM B117 are the main salt spray standards. Automotive and other sectors have their own cyclic corrosion procedures. Your customer specification names the one you need, along with the test duration.

How long should a salt spray test run?

It depends on the coating and the specification, and is set by the customer or the standard, not by the lab. Tests are specified in hours, and the pass criteria say how much corrosion is acceptable at the end.

Can the lab inspect samples during the test?

Most can check at set intervals and report, often with photographs. Agree the inspection points and what is recorded before the test starts.