Get listed Shortlist
Home > ESS Tests > Altitude & Pressure Testing

Altitude & Pressure Testing Companies in the UK

15 companies

3C Test logo

3C Test

Silverstone, Northamptonshire

New

3C Test in Silverstone is an Applus+ Laboratories EMC and environmental test lab serving automotive, EV battery, aerospace and defence, and consumer and industrial electronics customers. Its environmental work covers high and low temperature, thermal shock, thermal cycling, humidity, salt spray, altitude, sine and random vibration, shock, drop and topple, and combined climatic and vibration testing. Standards include BS EN 60068, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is UKAS-accredited to ISO 17025, lab number 1204. A 200 kN shaker can be combined with a large climatic chamber for EV battery pack testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Alphatech logo

Alphatech

Haverhill, Suffolk

New

Alphatech in Haverhill runs an independent UKAS-accredited environmental test lab alongside its chamber sales, hire and service business. The lab covers high and low temperature, damp heat, thermal shock, sine and random vibration, shock, bump, drop and topple, HALT and HASS, IP dust and water ingress up to IPX9K, neutral salt spray and altitude. Standards include BS EN 60068, IEC 60529, ISO 20653, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is accredited to ISO 17025, lab number 2645, with shakers of up to 40 kN. Customers can stay on site during testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
BAE Systems Faraday Test Centre logo

BAE Systems Faraday Test Centre

Rochester, Kent

New

BAE Systems Faraday Test Centre in Rochester is a UKAS-accredited environmental and EMC test facility that takes confidential test work from external customers as well as BAE Systems. Environmental capabilities cover temperature, thermal shock, humidity, sine, random and mixed-mode vibration, shock, bump, drop, acceleration, altitude, rapid and explosive decompression, driving rain, immersion, salt fog, icing, fluid contamination and combined temperature, altitude and humidity. Tests run to MIL-STD-810, RTCA DO-160, DEF STAN 00-35 and BS EN 60068. It is accredited to ISO 17025, lab number 0047, with 11 climatic chambers and shakers of up to 118.6 kN.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Element Warwick logo

Element Warwick

Warwick, Warwickshire

New

Element Warwick, in Warwick, is an environmental test laboratory running climatic, dynamic and ingress protection tests. Climatic work covers high and low temperature, humidity, thermal shock, altitude to 35 mbar, driving sand and dust, driving rain, icing and salt corrosion. Dynamic work covers sine and random vibration on a shaker with 160 kN peak thrust, vibration at high and low temperature, classical shock, bump, drop and topple, and acceleration. IP testing covers IP5X to IPX8. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, IEC 61373 and IEC 60529. It is UKAS-accredited to ISO 17025, lab number 31737, and serves aerospace, defence, energy and industrial sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration
Environmental Test Services (ETS) logo

Environmental Test Services (ETS)

Reading, Berkshire

New

Environmental Test Services is an independent, owner-managed environmental test laboratory in Reading, Berkshire. It runs vibration, shock, temperature and humidity, altitude and decompression, salt spray and IP testing, including combined temperature and vibration, thermal shock, icing and drop tests. Work is carried out to DEF STAN 00-35, MIL-STD-810, RTCA DO-160 and the IEC 60068 series, with IP testing to IEC 60529. The laboratory is UKAS-accredited to ISO 17025, lab number 1909. Facilities include a walk-in climatic chamber of 1.8 m x 2.4 m x 2.4 m and electromagnetic vibrators of up to 28 kN. Tested product types include aerospace, marine, satellite, telecoms and motor vehicle equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
JCS Technology logo

JCS Technology

Weston-super-Mare, Somerset

New

JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Leonardo Environmental Test Lab (Edinburgh) logo

Leonardo Environmental Test Lab (Edinburgh)

Edinburgh

New

Leonardo Environmental Test Lab in Edinburgh carries out climatic, dynamic and EMC testing at Leonardo UK's Crewe Toll site. Climatic tests cover high and low temperature from -60°C to +180°C, damp heat, thermal shock, altitude to 100,000 ft, rapid decompression, solar radiation, salt mist, immersion, drip and fluid contamination. Dynamic tests include sine and random vibration on shakers up to 13,000 lbf, combined temperature and vibration, shock, bump and drop. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0461, with climatic chambers up to 4 m x 1.5 m x 1.8 m.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
PARC (Product Assessment & Reliability Centre) logo

PARC (Product Assessment & Reliability Centre)

Bideford, Devon

New

PARC (Product Assessment & Reliability Centre) in Bideford, Devon, is an environmental test laboratory and part of the Apave group through Sopemea. It runs high and low temperature, damp heat, thermal shock, altitude, icing, rain, salt spray, IP, vibration, shock, bump and drop tests to IEC 60068, MIL-STD-810, DEF STAN 00-035, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 2379. Capacity includes temperature chambers of up to 2.7 m x 2.7 m x 2.7 m and a vibration system with 89 kN random force. It serves aerospace, defence, automotive, rail, marine, oil and gas and telecoms customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
QinetiQ Shoeburyness logo

QinetiQ Shoeburyness

Southend-on-Sea, Essex

New

The QinetiQ Environmental Test Centre at MoD Shoeburyness, Southend-on-Sea, is a UKAS-accredited environmental test facility for ordnance, munitions and explosives, operated by QinetiQ on behalf of the MOD under the LTPA contract. Services include single, twin and multi-axis shaker vibration, free-fall shock, impact and bounce, at temperatures from -60 to +90 °C. Climatic tests cover high and low temperature, steady-state and cyclic humidity, low pressure, rapid decompression, thermal shock, icing, salt mist and fluid contamination. Testing is accredited to ISO 17025 against DEF STAN 00-35, MIL-STD-810 and AECTP (UKAS lab 4294).

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Sine Vibration
Resonate Testing logo

Resonate Testing

Newry, County Down

New

Resonate Testing in Newry provides vibration, shock, climatic, ingress protection, battery and fire testing from a single facility. Tests include sine and random vibration with combined climatic conditioning, classical and pyroshock, drop, temperature, humidity, thermal shock, altitude to 100,000 ft, IP dust and water, salt spray, sand and dust, rain and fluid susceptibility. Main standards are IEC 60068, MIL-STD-810, RTCA DO-160, DEF STAN 00-35, ISO 16750 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 9373, and is an ISTA Certified Laboratory. Capacity includes a 70 kN shaker. It serves space, aerospace, defence, automotive, energy, medical and industrial customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Space Park Leicester logo

Space Park Leicester

Leicester, Leicestershire

New

Space Park Leicester in Leicester is a space innovation centre that is part of the University of Leicester and offers environmental testing services for hire. Its testing simulates the extreme thermal and vacuum conditions of space to check the performance and reliability of hardware for aerospace, satellite and defence projects. Capabilities cover temperature cycling between high and low temperatures, testing in near-vacuum conditions and customised temperature and vacuum test profiles. Services are open to the space industry, research organisations, SMEs and educational institutions, with each project quoted individually.

  • Thermal Cycling
  • Thermal Vacuum
TÜV SÜD Fareham logo

TÜV SÜD Fareham

Fareham, Hampshire

New

TÜV SÜD Fareham runs climatic and vibration environmental test facilities at its Hampshire headquarters alongside EMC, radio and electrical safety labs. Its tests cover high and low temperature, damp heat, thermal shock, altitude, rapid decompression, salt corrosion, icing, fluid contamination, water ingress to IPX8, sine and random vibration, shock, drop and transit testing, to standards including IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0141. Capacity includes climatic chambers up to 5.0 m x 6.0 m x 4.0 m and shakers up to 151 kN. Product groups served include aerospace, defence, rail, marine, satellites and medical devices.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
ZF Automotive UK Test & Validation logo

ZF Automotive UK Test & Validation

Solihull, West Midlands

New

ZF Automotive UK Test & Validation in Solihull offers EMC, environmental and materials testing for automotive and other industry components. Its environmental scope covers dry heat, low temperature, humidity, thermal cycling and thermal shock, salt mist, IP dust and water to IPX9K, icing, fluid contamination, low pressure, and sine, random, shock, bump and drop testing, with combined temperature and vibration. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0332. Capacity includes 2,500-litre climatic chambers and a 66 kN shaker. It serves automotive, aerospace and rail.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Altitude and low pressure testing labs in the UK reduce the air pressure around a product to represent flight or high ground. Typical tests are altitude and low pressure, often combined with temperature, rapid decompression, which represents a sudden loss of cabin pressure in an aircraft, and thermal vacuum, which tests space hardware under vacuum with controlled temperature.

Start with the standard and the profile. RTCA DO-160 covers airborne equipment, MIL-STD-810 includes a low pressure method, and altitude simulation is also part of the UN38.3 transport tests for lithium batteries. Ask what altitude, pressure change rate and temperature the test needs, and whether the product must be powered. Check that the chamber is large enough for the product and that it can hold the pressure and temperature profile together.

15 of the 45 UK labs listed here offer altitude, low pressure, rapid decompression or thermal vacuum testing. Filter by test and standard, and check the lab's UKAS scope if you need an accredited report. Use our guide to choosing between DEF STAN 00-35, MIL-STD-810 and DO-160 if your contract names an aerospace or defence standard.

Related categories: Climatic, Temperature & Humidity Testing, Military & Aerospace Environmental Testing and Vibration & Shock Testing.

Questions buyers ask

What is rapid decompression testing?

It simulates a sudden loss of cabin pressure in an aircraft by dropping the chamber pressure quickly, to check that equipment does not fail or become hazardous. The rate and pressure change are set by the standard, so ask the lab which one it can meet.

Which standards include altitude tests?

RTCA DO-160 includes temperature and altitude tests for airborne equipment, and MIL-STD-810 includes a low pressure method. UN38.3, the transport test regime for lithium batteries, includes an altitude simulation. Your specification names the one you need.

Can altitude be combined with temperature?

Yes. Many chambers can hold altitude and a temperature profile together. Ask the lab about the combined range, and about the rate at which pressure and temperature can change.

What is thermal vacuum testing?

Testing under a vacuum, with controlled temperature, to represent the conditions of space. It is used mainly for satellites and space hardware. Only a few labs offer it, so ask early about chamber size and availability.