Get listed Shortlist
Home > ESS Tests > Vibration & Shock Testing

Vibration & Shock Testing Companies in the UK

25 companies

1g Dynamics logo

1g Dynamics

Royston, Hertfordshire

New

1g Dynamics in Royston runs a UKAS-accredited test house for vibration and climatic testing alongside its vibration system support work. It carries out sine and random vibration, half-sine, sawtooth and trapezoidal shock, high and low temperature, thermal cycling, damp heat and combined temperature and vibration tests to BS EN 60068, MIL-STD-810 and RTCA DO-160. The test house is accredited to ISO 17025, lab number 6508. Capacity includes shakers of up to 55.6 kN and a 1,700-litre climatic chamber covering -70°C to +180°C. The company works with aerospace, automotive, rail and motorsport customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Combined Climatic and Vibration
3C Test logo

3C Test

Silverstone, Northamptonshire

New

3C Test in Silverstone is an Applus+ Laboratories EMC and environmental test lab serving automotive, EV battery, aerospace and defence, and consumer and industrial electronics customers. Its environmental work covers high and low temperature, thermal shock, thermal cycling, humidity, salt spray, altitude, sine and random vibration, shock, drop and topple, and combined climatic and vibration testing. Standards include BS EN 60068, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is UKAS-accredited to ISO 17025, lab number 1204. A 200 kN shaker can be combined with a large climatic chamber for EV battery pack testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Alphatech logo

Alphatech

Haverhill, Suffolk

New

Alphatech in Haverhill runs an independent UKAS-accredited environmental test lab alongside its chamber sales, hire and service business. The lab covers high and low temperature, damp heat, thermal shock, sine and random vibration, shock, bump, drop and topple, HALT and HASS, IP dust and water ingress up to IPX9K, neutral salt spray and altitude. Standards include BS EN 60068, IEC 60529, ISO 20653, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is accredited to ISO 17025, lab number 2645, with shakers of up to 40 kN. Customers can stay on site during testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Axis Test Laboratories logo

Axis Test Laboratories

Durham, Durham

New

Axis Test Laboratories in Durham is a UKAS-accredited environmental test lab serving marine, defence, rail, automotive, aerospace, oil and gas, renewable energy and industrial customers. It carries out dry heat, cold, thermal shock, damp heat, cyclic salt spray, sine and random vibration, half-sine shock and package drop testing. Standards include BS EN 60068, MIL-STD-810, BS EN 60945, BS EN 61373, ISO 9227 and ASTM B117. The lab is accredited to ISO 17025, lab number 7670. Its largest climatic chamber measures 2.0 x 3.0 x 2.0 m, and its shakers take static loads of up to 1,000 kg.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Salt Spray/Salt Fog
BAE Systems Faraday Test Centre logo

BAE Systems Faraday Test Centre

Rochester, Kent

New

BAE Systems Faraday Test Centre in Rochester is a UKAS-accredited environmental and EMC test facility that takes confidential test work from external customers as well as BAE Systems. Environmental capabilities cover temperature, thermal shock, humidity, sine, random and mixed-mode vibration, shock, bump, drop, acceleration, altitude, rapid and explosive decompression, driving rain, immersion, salt fog, icing, fluid contamination and combined temperature, altitude and humidity. Tests run to MIL-STD-810, RTCA DO-160, DEF STAN 00-35 and BS EN 60068. It is accredited to ISO 17025, lab number 0047, with 11 climatic chambers and shakers of up to 118.6 kN.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Cranage EMC & Safety logo

Cranage EMC & Safety

Market Drayton, Shropshire

New

Cranage EMC & Safety in Market Drayton, Shropshire, runs environmental tests alongside EMC and product safety work. Its climatic chambers cover temperature, humidity and damp heat, temperature cycling, solar radiation and salt spray. Mechanical tests include random and swept sine vibration from 5 Hz to 2 kHz and shock up to 500 m/s². Ingress protection testing covers dust and water from IP1X to IPX9K, with a 50 m² indoor IPX9K area. Standards include IEC 60068 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 1833, and serves medical, rail and industrial equipment makers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Solar Radiation
Element Warwick logo

Element Warwick

Warwick, Warwickshire

New

Element Warwick, in Warwick, is an environmental test laboratory running climatic, dynamic and ingress protection tests. Climatic work covers high and low temperature, humidity, thermal shock, altitude to 35 mbar, driving sand and dust, driving rain, icing and salt corrosion. Dynamic work covers sine and random vibration on a shaker with 160 kN peak thrust, vibration at high and low temperature, classical shock, bump, drop and topple, and acceleration. IP testing covers IP5X to IPX8. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, IEC 61373 and IEC 60529. It is UKAS-accredited to ISO 17025, lab number 31737, and serves aerospace, defence, energy and industrial sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration
Environmental Test Services (ETS) logo

Environmental Test Services (ETS)

Reading, Berkshire

New

Environmental Test Services is an independent, owner-managed environmental test laboratory in Reading, Berkshire. It runs vibration, shock, temperature and humidity, altitude and decompression, salt spray and IP testing, including combined temperature and vibration, thermal shock, icing and drop tests. Work is carried out to DEF STAN 00-35, MIL-STD-810, RTCA DO-160 and the IEC 60068 series, with IP testing to IEC 60529. The laboratory is UKAS-accredited to ISO 17025, lab number 1909. Facilities include a walk-in climatic chamber of 1.8 m x 2.4 m x 2.4 m and electromagnetic vibrators of up to 28 kN. Tested product types include aerospace, marine, satellite, telecoms and motor vehicle equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Ex Veritas logo

Ex Veritas

Wrexham

New

Ex Veritas is a hazardous-area certification body with test laboratories in Wrexham, Wales. Its laboratory offers ingress protection testing to EN 60529, covering dust-protected (IP5X) and dust-tight (IP6X) categories and water ingress from IPX3 to IPX8, plus NEMA 4 testing for North American approval. Environmental and safety facilities include four humidity and thermal conditioning chambers, thermal cycling and thermal shock testing, and drop tests. The Wrexham laboratory is UKAS-accredited to ISO 17025, lab number 8613, and is an IECEx test laboratory. Testing supports UKCA, ATEX, IECEx and North American approvals.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

HORIBA MIRA Basildon

Basildon, Essex

New

HORIBA MIRA Basildon, at Quatro Park in Basildon, Essex, tests components and systems under vibration, climatic cycling, thermal shock, mechanical shock, corrosion and ingress protection. Facilities include 13 environmental chambers from 180 to 2,000 litres, two 36,000-litre walk-in chambers, electromagnetic vibrators and large battery shakers, including an IMV K350 with 900 kN shock thrust. Work is carried out to IEC 60068, MIL-STD-810, DEF STAN 00-35 and RTCA DO-160, including electric vehicle battery packs and modules. The site is UKAS-accredited to ISO 17025, lab number 2654, and serves the automotive, defence and aerospace sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
HORIBA MIRA Nuneaton logo

HORIBA MIRA Nuneaton

Nuneaton, Warwickshire

New

HORIBA MIRA in Nuneaton, Warwickshire, offers environmental testing alongside its vehicle engineering services. Its whole-vehicle static climatic chambers run from -40 to +80 °C with humidity to 98% RH and solar loading, using cyclic profiles such as DEF STAN 00-35 and MIL-STD-810G. Climatic wind tunnels simulate cold, snow, solar loading, humidity and driven rain. Component and battery environmental testing, including climatic cycling, thermal shock, mechanical shock, vibration and dust testing, is carried out at its Basildon site in Essex. HORIBA MIRA holds UKAS testing accreditation to ISO 17025 (Nuneaton lab 1105, Basildon lab 2654). It serves automotive, defence and aerospace customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Intertek Leatherhead

Leatherhead, Surrey

New

Intertek Leatherhead, in Leatherhead, Surrey, runs climatic, vibration, shock and ingress testing alongside EMC, safety and medical testing at one site. Climatic work covers dry heat to +180 C, cold to -75 C, thermal cycling, and cyclic and steady-state damp heat from 10% to 98% rh, to IEC 60068 and MIL-STD-810. Mechanical tests include sine vibration from 2 to 5,000 Hz and half-sine shock up to 5,000 g. Dust and water ingress tests run to IEC 60529, covering IP5X and IP6X dust and IPX1 to IPX8 water. The lab is UKAS-accredited to ISO 17025, lab number 0029, and serves electronics, medical, automotive, building, industrial and energy customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Sine Vibration
Leonardo Environmental Test Lab (Edinburgh) logo

Leonardo Environmental Test Lab (Edinburgh)

Edinburgh

New

Leonardo Environmental Test Lab in Edinburgh carries out climatic, dynamic and EMC testing at Leonardo UK's Crewe Toll site. Climatic tests cover high and low temperature from -60°C to +180°C, damp heat, thermal shock, altitude to 100,000 ft, rapid decompression, solar radiation, salt mist, immersion, drip and fluid contamination. Dynamic tests include sine and random vibration on shakers up to 13,000 lbf, combined temperature and vibration, shock, bump and drop. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0461, with climatic chambers up to 4 m x 1.5 m x 1.8 m.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Medical Engineering Technologies (MET) logo

Medical Engineering Technologies (MET)

Dover, Kent

New

Medical Engineering Technologies (MET) in Dover, Kent, tests medical devices and their packaging, including transit simulation for shipping validation. Its UKAS ISO 17025 scope, lab number 7848, covers distribution testing to ASTM D4169 and ASTM D7386, random vibration of shipping containers, sinusoidal vibration to BS EN 60068-2-6, drop, impact and compression tests, and temperature and humidity conditioning of packages from -30°C to +60°C. Its vibration system takes payloads of up to 300 kg. The lab also carries out accelerated ageing and seal integrity testing for ISO 11607 packaging validation. It works with medical device and pharmaceutical packaging customers.

  • Transport Simulation
  • Package Drop and Compression
  • Sine Vibration
  • Random Vibration
MS Testing logo

MS Testing

Newton Aycliffe, Durham

New

MS Testing in Newton Aycliffe, County Durham, is a test laboratory for environmental, EMC and marine type approval work. Its environmental testing covers high and low temperature, damp heat, thermal shock, salt mist, sine and random vibration, half-sine shock, static and dynamic inclination, and dust and water ingress from IP1X to IPX8. Tests are run to IEC 60068, IEC 60529, IEC 60945 and IACS E10. The lab is UKAS-accredited to ISO 17025, lab number 4413, and its largest climatic chamber measures 1.6 m x 1.9 m x 1.6 m. Its main sector is marine equipment, and its salt spray testing also serves automotive components.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
PARC (Product Assessment & Reliability Centre) logo

PARC (Product Assessment & Reliability Centre)

Bideford, Devon

New

PARC (Product Assessment & Reliability Centre) in Bideford, Devon, is an environmental test laboratory and part of the Apave group through Sopemea. It runs high and low temperature, damp heat, thermal shock, altitude, icing, rain, salt spray, IP, vibration, shock, bump and drop tests to IEC 60068, MIL-STD-810, DEF STAN 00-035, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 2379. Capacity includes temperature chambers of up to 2.7 m x 2.7 m x 2.7 m and a vibration system with 89 kN random force. It serves aerospace, defence, automotive, rail, marine, oil and gas and telecoms customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
QinetiQ Shoeburyness logo

QinetiQ Shoeburyness

Southend-on-Sea, Essex

New

The QinetiQ Environmental Test Centre at MoD Shoeburyness, Southend-on-Sea, is a UKAS-accredited environmental test facility for ordnance, munitions and explosives, operated by QinetiQ on behalf of the MOD under the LTPA contract. Services include single, twin and multi-axis shaker vibration, free-fall shock, impact and bounce, at temperatures from -60 to +90 °C. Climatic tests cover high and low temperature, steady-state and cyclic humidity, low pressure, rapid decompression, thermal shock, icing, salt mist and fluid contamination. Testing is accredited to ISO 17025 against DEF STAN 00-35, MIL-STD-810 and AECTP (UKAS lab 4294).

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Sine Vibration
Resonate Testing logo

Resonate Testing

Newry, County Down

New

Resonate Testing in Newry provides vibration, shock, climatic, ingress protection, battery and fire testing from a single facility. Tests include sine and random vibration with combined climatic conditioning, classical and pyroshock, drop, temperature, humidity, thermal shock, altitude to 100,000 ft, IP dust and water, salt spray, sand and dust, rain and fluid susceptibility. Main standards are IEC 60068, MIL-STD-810, RTCA DO-160, DEF STAN 00-35, ISO 16750 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 9373, and is an ISTA Certified Laboratory. Capacity includes a 70 kN shaker. It serves space, aerospace, defence, automotive, energy, medical and industrial customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Rivencore Global Solutions

Poole, Dorset

New

Rivencore Global Solutions in Poole offers environmental testing from its laboratory on the south coast. Tests include dry heat, low temperature, change of temperature and humidity in a 1,500-litre climatic chamber covering -70°C to +180°C, IP dust and water ingress from IP5X and IPX1 to IPX8, drop testing up to 15 kg, mechanical strength testing and HALT with combined random vibration and temperature stress. Main standards are IEC 60068, IEC 60529, MIL-STD-810, BS EN 60945 and IEC 62368-1. The laboratory is UKAS-accredited to ISO 17025, lab number 28772.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Bump and Drop
TÜV SÜD Fareham logo

TÜV SÜD Fareham

Fareham, Hampshire

New

TÜV SÜD Fareham runs climatic and vibration environmental test facilities at its Hampshire headquarters alongside EMC, radio and electrical safety labs. Its tests cover high and low temperature, damp heat, thermal shock, altitude, rapid decompression, salt corrosion, icing, fluid contamination, water ingress to IPX8, sine and random vibration, shock, drop and transit testing, to standards including IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0141. Capacity includes climatic chambers up to 5.0 m x 6.0 m x 4.0 m and shakers up to 151 kN. Product groups served include aerospace, defence, rail, marine, satellites and medical devices.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
UTAC UK - Leyland logo

UTAC UK - Leyland

Preston, Lancashire

New

UTAC UK Leyland, at Aston Way in Leyland, Lancashire, offers component environmental testing alongside vehicle interior and heavy-vehicle dynamic testing. Its accredited scope covers high and low temperature, thermal shock, steady and cyclic humidity, salt spray, sine and random vibration at ambient or with temperature, and classical shock and bump, to IEC 60068, ASTM B117 and ISO 9227. The lab is UKAS-accredited to ISO 17025, lab number 10121. Capacity includes climatic chambers up to 3 m x 4 m x 6 m, a 40 kN electrodynamic shaker and hydraulic vibration rigs up to 250 kN. Product groups include motor vehicles, aerospace, rail, marine and telecommunications equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration

Vibration and shock testing labs in the UK use shakers to subject products to the vibration and impacts they meet in transport and use. The main tests are sine vibration, which sweeps or dwells at set frequencies, random vibration, which represents the broadband vibration of vehicles, aircraft and machinery, and mechanical shock, a sudden short pulse of acceleration. Bump and drop tests cover repeated or single impacts.

Start with the standard and the levels. IEC 60068-2 includes parts for sine vibration, random vibration and shock, and MIL-STD-810, DEF STAN 00-35, RTCA DO-160, EN 61373 (rail) and ISO 16750 (road vehicles) set levels for their sectors. Then check the shaker: its maximum force limits how heavy a product it can test, and its frequency range and table size decide what can be mounted. The fixture that holds your product matters as much as the shaker, so ask who designs it and what it adds to the cost.

25 of the 45 UK labs listed here offer vibration or shock testing. Filter by test, standard and maximum shaker force, then check the lab's UKAS schedule for your test. Use our guide to choosing a UK environmental test lab for the questions to ask.

Related categories: Climatic, Temperature & Humidity Testing, Transport & Packaging Testing and HALT, HASS & Stress Screening.

Questions buyers ask

What is the difference between sine and random vibration?

Sine vibration applies a single frequency at a time, either dwelling at a frequency or sweeping through a range, and is used to find resonances and test endurance. Random vibration applies many frequencies at once and is closer to the vibration of vehicles, aircraft and machinery. A specification usually names which is needed.

What shaker force do I need?

Force is roughly the mass of the product, fixture and moving parts multiplied by the acceleration the test requires, so heavier products and higher levels need a bigger shaker. Ask the lab to check your levels against its shaker, and use the maximum shaker force filter to find labs with enough capacity.

Who makes the test fixture?

It depends on the lab. Many design and make fixtures, others ask you to supply one. A poor fixture can distort the test, so ask who designs it, how its performance is checked and what it adds to cost and lead time.

Can vibration be combined with temperature?

Yes. Combined climatic and vibration chambers apply temperature and vibration at the same time, which is closer to real use than testing them separately. Check the labs that list combined testing, and ask about the temperature range and the vibration levels available together.