Get listed Shortlist
Home > ESS Tests > Military & Aerospace Environmental Testing

Military & Aerospace Environmental Testing Companies in the UK

27 companies

1g Dynamics logo

1g Dynamics

Royston, Hertfordshire

New

1g Dynamics in Royston runs a UKAS-accredited test house for vibration and climatic testing alongside its vibration system support work. It carries out sine and random vibration, half-sine, sawtooth and trapezoidal shock, high and low temperature, thermal cycling, damp heat and combined temperature and vibration tests to BS EN 60068, MIL-STD-810 and RTCA DO-160. The test house is accredited to ISO 17025, lab number 6508. Capacity includes shakers of up to 55.6 kN and a 1,700-litre climatic chamber covering -70°C to +180°C. The company works with aerospace, automotive, rail and motorsport customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Combined Climatic and Vibration
3C Test logo

3C Test

Silverstone, Northamptonshire

New

3C Test in Silverstone is an Applus+ Laboratories EMC and environmental test lab serving automotive, EV battery, aerospace and defence, and consumer and industrial electronics customers. Its environmental work covers high and low temperature, thermal shock, thermal cycling, humidity, salt spray, altitude, sine and random vibration, shock, drop and topple, and combined climatic and vibration testing. Standards include BS EN 60068, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is UKAS-accredited to ISO 17025, lab number 1204. A 200 kN shaker can be combined with a large climatic chamber for EV battery pack testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Accelerated Weathering Laboratory (AWL) logo

Accelerated Weathering Laboratory (AWL)

Calne, Wiltshire

New

Accelerated Weathering Laboratory (AWL) in Calne tests coatings, plastics, composites and finished products for corrosion and weathering resistance. Its services include neutral and acidified salt spray, cyclic corrosion, fluorescent UV and xenon arc weathering, and climatic temperature and humidity exposure from -40°C to +180°C, as well as Taber abrasion and number plate testing. Standards include ASTM B117, ISO 9227, ISO 12944, ISO 4892, DEF STAN 00-35 and a range of vehicle manufacturer specifications. The lab is UKAS-accredited to ISO 17025, lab number 7517, and works with the automotive, aerospace, defence and medical sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Salt Spray/Salt Fog
  • Cyclic Corrosion
Aerotech Laboratories logo

Aerotech Laboratories

Coventry, West Midlands

New

Aerotech Laboratories in Coventry offers neutral salt spray corrosion testing alongside chemical analysis and NDT consumables testing for the aerospace, defence, automotive and metal finishing industries. Salt spray testing runs in three cabinets with 1,500 litres of total capacity, the largest measuring 1,465 x 1,040 x 720 mm, to standards including ASTM B117, ISO 9227 and MIL-STD-810 Method 509. The cabinets run 24 hours a day, all year round, and testing is priced per sample. The lab is UKAS-accredited to ISO 17025, lab number 1993, for neutral salt spray, chemical analysis and fluorescent penetrant testing.

  • Salt Spray/Salt Fog
Alphatech logo

Alphatech

Haverhill, Suffolk

New

Alphatech in Haverhill runs an independent UKAS-accredited environmental test lab alongside its chamber sales, hire and service business. The lab covers high and low temperature, damp heat, thermal shock, sine and random vibration, shock, bump, drop and topple, HALT and HASS, IP dust and water ingress up to IPX9K, neutral salt spray and altitude. Standards include BS EN 60068, IEC 60529, ISO 20653, ISO 16750, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. It is accredited to ISO 17025, lab number 2645, with shakers of up to 40 kN. Customers can stay on site during testing.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Axis Test Laboratories logo

Axis Test Laboratories

Durham, Durham

New

Axis Test Laboratories in Durham is a UKAS-accredited environmental test lab serving marine, defence, rail, automotive, aerospace, oil and gas, renewable energy and industrial customers. It carries out dry heat, cold, thermal shock, damp heat, cyclic salt spray, sine and random vibration, half-sine shock and package drop testing. Standards include BS EN 60068, MIL-STD-810, BS EN 60945, BS EN 61373, ISO 9227 and ASTM B117. The lab is accredited to ISO 17025, lab number 7670. Its largest climatic chamber measures 2.0 x 3.0 x 2.0 m, and its shakers take static loads of up to 1,000 kg.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Salt Spray/Salt Fog
BAE Systems Faraday Test Centre logo

BAE Systems Faraday Test Centre

Rochester, Kent

New

BAE Systems Faraday Test Centre in Rochester is a UKAS-accredited environmental and EMC test facility that takes confidential test work from external customers as well as BAE Systems. Environmental capabilities cover temperature, thermal shock, humidity, sine, random and mixed-mode vibration, shock, bump, drop, acceleration, altitude, rapid and explosive decompression, driving rain, immersion, salt fog, icing, fluid contamination and combined temperature, altitude and humidity. Tests run to MIL-STD-810, RTCA DO-160, DEF STAN 00-35 and BS EN 60068. It is accredited to ISO 17025, lab number 0047, with 11 climatic chambers and shakers of up to 118.6 kN.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Element Warwick logo

Element Warwick

Warwick, Warwickshire

New

Element Warwick, in Warwick, is an environmental test laboratory running climatic, dynamic and ingress protection tests. Climatic work covers high and low temperature, humidity, thermal shock, altitude to 35 mbar, driving sand and dust, driving rain, icing and salt corrosion. Dynamic work covers sine and random vibration on a shaker with 160 kN peak thrust, vibration at high and low temperature, classical shock, bump, drop and topple, and acceleration. IP testing covers IP5X to IPX8. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, IEC 61373 and IEC 60529. It is UKAS-accredited to ISO 17025, lab number 31737, and serves aerospace, defence, energy and industrial sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration
Environmental Test Services (ETS) logo

Environmental Test Services (ETS)

Reading, Berkshire

New

Environmental Test Services is an independent, owner-managed environmental test laboratory in Reading, Berkshire. It runs vibration, shock, temperature and humidity, altitude and decompression, salt spray and IP testing, including combined temperature and vibration, thermal shock, icing and drop tests. Work is carried out to DEF STAN 00-35, MIL-STD-810, RTCA DO-160 and the IEC 60068 series, with IP testing to IEC 60529. The laboratory is UKAS-accredited to ISO 17025, lab number 1909. Facilities include a walk-in climatic chamber of 1.8 m x 2.4 m x 2.4 m and electromagnetic vibrators of up to 28 kN. Tested product types include aerospace, marine, satellite, telecoms and motor vehicle equipment.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

HORIBA MIRA Basildon

Basildon, Essex

New

HORIBA MIRA Basildon, at Quatro Park in Basildon, Essex, tests components and systems under vibration, climatic cycling, thermal shock, mechanical shock, corrosion and ingress protection. Facilities include 13 environmental chambers from 180 to 2,000 litres, two 36,000-litre walk-in chambers, electromagnetic vibrators and large battery shakers, including an IMV K350 with 900 kN shock thrust. Work is carried out to IEC 60068, MIL-STD-810, DEF STAN 00-35 and RTCA DO-160, including electric vehicle battery packs and modules. The site is UKAS-accredited to ISO 17025, lab number 2654, and serves the automotive, defence and aerospace sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
HORIBA MIRA Nuneaton logo

HORIBA MIRA Nuneaton

Nuneaton, Warwickshire

New

HORIBA MIRA in Nuneaton, Warwickshire, offers environmental testing alongside its vehicle engineering services. Its whole-vehicle static climatic chambers run from -40 to +80 °C with humidity to 98% RH and solar loading, using cyclic profiles such as DEF STAN 00-35 and MIL-STD-810G. Climatic wind tunnels simulate cold, snow, solar loading, humidity and driven rain. Component and battery environmental testing, including climatic cycling, thermal shock, mechanical shock, vibration and dust testing, is carried out at its Basildon site in Essex. HORIBA MIRA holds UKAS testing accreditation to ISO 17025 (Nuneaton lab 1105, Basildon lab 2654). It serves automotive, defence and aerospace customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Intertek Leatherhead

Leatherhead, Surrey

New

Intertek Leatherhead, in Leatherhead, Surrey, runs climatic, vibration, shock and ingress testing alongside EMC, safety and medical testing at one site. Climatic work covers dry heat to +180 C, cold to -75 C, thermal cycling, and cyclic and steady-state damp heat from 10% to 98% rh, to IEC 60068 and MIL-STD-810. Mechanical tests include sine vibration from 2 to 5,000 Hz and half-sine shock up to 5,000 g. Dust and water ingress tests run to IEC 60529, covering IP5X and IP6X dust and IPX1 to IPX8 water. The lab is UKAS-accredited to ISO 17025, lab number 0029, and serves electronics, medical, automotive, building, industrial and energy customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Sine Vibration
Javer Labs logo

Javer Labs

Nottingham, Nottinghamshire

New

Javer Labs in Nottingham is a laboratory specialising in fungus resistance and mould growth testing. It tests aerospace and defence components and equipment to MIL-STD-810 Method 508, RTCA DO-160 Section 13, BS EN 60068-2-10 and DEF STAN 00-35, with ISO 846 available on request. The laboratory is UKAS-accredited to ISO 17025 for fungus resistance testing, lab number 31736, and is registered on JOSCAR. It is based at Nottingham Science Park and plans to add further environmental tests, starting with susceptibility to fluids.

  • Fungus/Mould Growth
JCS Technology logo

JCS Technology

Weston-super-Mare, Somerset

New

JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Leonardo Environmental Test Lab (Edinburgh) logo

Leonardo Environmental Test Lab (Edinburgh)

Edinburgh

New

Leonardo Environmental Test Lab in Edinburgh carries out climatic, dynamic and EMC testing at Leonardo UK's Crewe Toll site. Climatic tests cover high and low temperature from -60°C to +180°C, damp heat, thermal shock, altitude to 100,000 ft, rapid decompression, solar radiation, salt mist, immersion, drip and fluid contamination. Dynamic tests include sine and random vibration on shakers up to 13,000 lbf, combined temperature and vibration, shock, bump and drop. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 0461, with climatic chambers up to 4 m x 1.5 m x 1.8 m.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
PARC (Product Assessment & Reliability Centre) logo

PARC (Product Assessment & Reliability Centre)

Bideford, Devon

New

PARC (Product Assessment & Reliability Centre) in Bideford, Devon, is an environmental test laboratory and part of the Apave group through Sopemea. It runs high and low temperature, damp heat, thermal shock, altitude, icing, rain, salt spray, IP, vibration, shock, bump and drop tests to IEC 60068, MIL-STD-810, DEF STAN 00-035, RTCA DO-160, ISO 16750 and EN 61373. The lab is UKAS-accredited to ISO 17025, lab number 2379. Capacity includes temperature chambers of up to 2.7 m x 2.7 m x 2.7 m and a vibration system with 89 kN random force. It serves aerospace, defence, automotive, rail, marine, oil and gas and telecoms customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
QinetiQ Shoeburyness logo

QinetiQ Shoeburyness

Southend-on-Sea, Essex

New

The QinetiQ Environmental Test Centre at MoD Shoeburyness, Southend-on-Sea, is a UKAS-accredited environmental test facility for ordnance, munitions and explosives, operated by QinetiQ on behalf of the MOD under the LTPA contract. Services include single, twin and multi-axis shaker vibration, free-fall shock, impact and bounce, at temperatures from -60 to +90 °C. Climatic tests cover high and low temperature, steady-state and cyclic humidity, low pressure, rapid decompression, thermal shock, icing, salt mist and fluid contamination. Testing is accredited to ISO 17025 against DEF STAN 00-35, MIL-STD-810 and AECTP (UKAS lab 4294).

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Sine Vibration
Resonate Testing logo

Resonate Testing

Newry, County Down

New

Resonate Testing in Newry provides vibration, shock, climatic, ingress protection, battery and fire testing from a single facility. Tests include sine and random vibration with combined climatic conditioning, classical and pyroshock, drop, temperature, humidity, thermal shock, altitude to 100,000 ft, IP dust and water, salt spray, sand and dust, rain and fluid susceptibility. Main standards are IEC 60068, MIL-STD-810, RTCA DO-160, DEF STAN 00-35, ISO 16750 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 9373, and is an ISTA Certified Laboratory. Capacity includes a 70 kN shaker. It serves space, aerospace, defence, automotive, energy, medical and industrial customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Rhymney Test Equipment (Testing House) logo

Rhymney Test Equipment (Testing House)

Rhymney, Caerphilly

New

Rhymney Test Equipment (Testing House) in Rhymney runs an environmental testing laboratory for climatic and corrosion work. Tests include dry heat to +180°C, cold to -70°C, temperature cycling, thermal shock, humidity, salt spray and transport simulation, for design and development, standards compliance, accelerated life testing and production monitoring. Main standards are IEC 60068, DEF STAN 00-35, MIL-STD-810, ASTM B117 and ISO 9227. The lab is UKAS-accredited to ISO 17025, lab number 22985, and holds ISO 9001. Its largest climatic chamber measures 1.5 m x 2.4 m x 1.5 m. The company also offers chamber calibration, chamber hire and chamber sales.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Rivencore Global Solutions

Poole, Dorset

New

Rivencore Global Solutions in Poole offers environmental testing from its laboratory on the south coast. Tests include dry heat, low temperature, change of temperature and humidity in a 1,500-litre climatic chamber covering -70°C to +180°C, IP dust and water ingress from IP5X and IPX1 to IPX8, drop testing up to 15 kg, mechanical strength testing and HALT with combined random vibration and temperature stress. Main standards are IEC 60068, IEC 60529, MIL-STD-810, BS EN 60945 and IEC 62368-1. The laboratory is UKAS-accredited to ISO 17025, lab number 28772.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Bump and Drop

Military and aerospace environmental testing labs in the UK test equipment to the standards used for defence and airborne programmes: MIL-STD-810, the United States Department of Defense's environmental test methods, DEF STAN 00-35, the UK Ministry of Defence's Environmental Handbook for Defence Materiel, and RTCA DO-160, the standard for environmental conditions and test procedures for airborne equipment. They share many tests, including temperature, altitude, humidity, vibration, shock, sand and dust, salt fog and icing, but they are written differently and are not interchangeable.

Start with your contract. It names the standard, the issue, the methods and the levels, and a lab can quote accurately only against that. MIL-STD-810 expects the test levels to be tailored to the equipment's life, so ask who defines the tailoring. Some DO-160 sections cover electrical and electromagnetic tests, which are run by EMC Directory labs, so a full programme can involve more than one lab.

27 of the 45 UK labs listed here state at least one of these standards, and 23 list aerospace and defence customers. Check the lab's UKAS scope if you need accredited results. Read our guide to choosing between DEF STAN 00-35, MIL-STD-810 and DO-160, and choosing a UK environmental test lab for what else to ask.

Related categories: Climatic, Temperature & Humidity Testing, Vibration & Shock Testing and Altitude & Pressure Testing.

Questions buyers ask

What is the difference between MIL-STD-810 and DEF STAN 00-35?

MIL-STD-810 is a United States standard of environmental test methods, and DEF STAN 00-35 is the UK Ministry of Defence's environmental handbook, covering management of the environmental programme as well as test methods. Both are used for defence equipment. A UK contract that cites DEF STAN 00-35 is asking for the UK approach.

What is RTCA DO-160?

The standard for environmental conditions and test procedures for airborne equipment, used for civil aircraft. Its European counterpart is EUROCAE ED-14. It is organised in numbered sections, each with categories matched to where the equipment sits in the aircraft.

Does the lab need to be accredited?

Many defence and aerospace customers ask for UKAS-accredited results, and some approve labs themselves. Ask your customer, then check that your tests are within the lab's UKAS scope, since accreditation covers only the tests on its schedule.

Who sets the test levels?

Your contract or customer specification. MIL-STD-810 in particular is meant to be tailored to the environments the equipment will meet, so the levels are agreed for the programme. Some labs offer test planning to help with that.