Get listed Shortlist
Home > ESS Tests > Sand, Dust & Mud Testing

Sand, Dust & Mud Testing Companies in the UK

4 companies

Element Warwick logo

Element Warwick

Warwick, Warwickshire

New

Element Warwick, in Warwick, is an environmental test laboratory running climatic, dynamic and ingress protection tests. Climatic work covers high and low temperature, humidity, thermal shock, altitude to 35 mbar, driving sand and dust, driving rain, icing and salt corrosion. Dynamic work covers sine and random vibration on a shaker with 160 kN peak thrust, vibration at high and low temperature, classical shock, bump, drop and topple, and acceleration. IP testing covers IP5X to IPX8. Standards include IEC 60068, MIL-STD-810, DEF STAN 00-35, IEC 61373 and IEC 60529. It is UKAS-accredited to ISO 17025, lab number 31737, and serves aerospace, defence, energy and industrial sectors.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Shock
  • Combined Climatic and Vibration
JCS Technology logo

JCS Technology

Weston-super-Mare, Somerset

New

JCS Technology in Weston-super-Mare is an independent test laboratory offering environmental, mechanical, fire and microbiological testing. Its environmental work covers temperature and humidity, thermal shock, altitude, icing, solar radiation, xenon arc and UV weathering, salt spray, toxic and mixed gas corrosion, sand and dust, fluid susceptibility and mould growth. Standards include BS EN 60068, MIL-STD-810, DEF STAN 00-35, RTCA DO-160, ASTM B117 and ISO 9227. The laboratory is UKAS-accredited to ISO 17025, lab number 2154, and certified to ISO 9001. Sectors served include aerospace, defence, automotive, rail, marine, energy, medical and telecommunications.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock
Resonate Testing logo

Resonate Testing

Newry, County Down

New

Resonate Testing in Newry provides vibration, shock, climatic, ingress protection, battery and fire testing from a single facility. Tests include sine and random vibration with combined climatic conditioning, classical and pyroshock, drop, temperature, humidity, thermal shock, altitude to 100,000 ft, IP dust and water, salt spray, sand and dust, rain and fluid susceptibility. Main standards are IEC 60068, MIL-STD-810, RTCA DO-160, DEF STAN 00-35, ISO 16750 and IEC 60529. The lab is UKAS-accredited to ISO 17025, lab number 9373, and is an ISTA Certified Laboratory. Capacity includes a 70 kN shaker. It serves space, aerospace, defence, automotive, energy, medical and industrial customers.

  • Temperature (Hot/Cold)
  • Humidity/Damp Heat
  • Thermal Cycling
  • Thermal Shock

Sand, dust and mud testing labs in the UK test whether products keep working when exposed to wind-blown sand, fine dust or mud and slurry. The tests are used for defence equipment, vehicles, outdoor electronics and anything used in harsh ground conditions. Blowing sand and dust tests use a chamber with controlled airflow and particle concentration, and mud tests splash or coat the product.

Start with the standard. MIL-STD-810 and RTCA DO-160 both include sand and dust tests, and IEC 60529 covers dust ingress for the IP code, which is a different test. Ask which particle type, concentration, air speed and duration the specification requires, and whether the product must run during exposure. Check the chamber size against the product.

4 of the 45 UK labs listed here offer blowing sand and dust or mud testing. Filter by test and standard, and use our guide to choosing between DEF STAN 00-35, MIL-STD-810 and DO-160 if your contract names a defence or aerospace standard.

Related categories: IP & Ingress Testing, Military & Aerospace Environmental Testing and Rain, Ice & Fluid Testing.

Questions buyers ask

What is the difference between sand and dust testing and an IP dust test?

An IP dust test under IEC 60529 checks dust ingress into an enclosure, and is passed at IP5X or IP6X. Sand and dust tests in MIL-STD-810 or DO-160 expose the product to blowing sand and dust at set conditions to see whether it still works. They are different tests with different pass criteria.

Which standards include sand and dust tests?

MIL-STD-810 and RTCA DO-160 both have sand and dust tests, and DEF STAN 00-35 covers them for UK defence programmes. Check which one your contract names, and which particle size and concentration apply.

Does the product need to run during the test?

It depends on the specification. Some tests expose a non-operating product, and others require it to operate. Say what monitoring is needed so the lab can plan power, cabling and checks.

How big a product can be tested?

It depends on the chamber. Ask the lab for the internal dimensions and airflow arrangement, and compare them with the product. Listings give a chamber size band where a lab states it.